Guys help me fix my VR Video problem.

NSFW

Some videos, like those from WankzVR or NA play without any problem. But if I play videos from CzechVR or Badoink for example, the videos start stuttering and lagging and it seems my PC cant keep the FPS at 90. I meet the recommended system specs and thus some producers files play normally, I think it may be a Codec problem? I don't have much knowledge about these things, but is it possible that this problem is because those studios are compressing their videos with a codec which needs more pc performence when played? Or is there any other way to fix this? I am using DEO VR or Vive Cinema as a player. Dont like whirligig tbh. Thanks!

Posted Jul 20, 2017, 1:27 PM UTC

612
frankyVR•

Well some more information about your situation, could help.

Since you gave little to no information what you are actually trying to watch and what hardware and software you use at your end. It's pretty hard or impossible to help you fix anything.

Anyways, your HW/SW combination can deal with a certain amount of video information. The biggest difference between those studios are they offer files with different resolutions. If the oculus version of a frame from Wankzvr is 100% than NA got 113% and CzechVR&Badoink got 145% pixels that need to be rendered. All theses studios use almost the same bitrate +/- 5%, encodeh.264 with recommend decoder perfomance of level 5.2.

IIRC, in an older post you complained about stuttering while moving you head.

That's why my bet is your system lacks the GPU power for frame rendering, could be a video driver issue or an OS issue if you got the recommended 8GB but only the minimum OS Win8.1 (32bit).

Check it out, press pause and look around, if it still stutters, than codecs are not your main issue.

In that case, only better HW or a 'cheaper' video file, like the GearVR versions will help. The video quality of the WankzVR Oculus files is not much ahead of the CzechVR GearVR files.

3
Biomon111OP•

I got an Intel i5-4690 CPU and a GTX 970. (as well as an SSD) When paused, the videos do not stutter on my computer. I agree to Mansquirt, i'd rather sacrifice more space on my drive than upgrading to a better GPU or CPU. Some producers doing it right, some are doing it wrong in my opinion. If you compare NA to Badoink for example, there is not much difference in quality in my opinion. I'd rather say NA's quality is better. NA files are playing fine while Badoink files stutter. That's weird!

2
frankyVR•

I got the same GPU and almost the same CPU (i5-6600, yours should even do slightly better) and I got no problems with BaDoink and CzechVR. But I am using a Oculus CV1 and can't comment on Vive issues. The bottleneck or demand for more computation power compared to my oculus could be in the Vive interface lib of 'drivers' too. Another issue could be your OS and codec setup.

Sorry, but face it, you are doing it wrong not the studios that are trying to deliver what is maximum possible. If your setup isn't fit enough to run a game on max settings, you lower settings.

Each studio offers a varity of formats, just choose the one that works for you.

2
Mansquirt•

Sounds like the same problem I have with a lot of the new H.265 encoded videos and its getting a real pain in the ass.

I use a Vive with SimpleVR or Whirligig a 980ti and i7 2600 16gb RAM and still get major stuttering from H.265 Occulus/Vive category vids even with all VLC codecs updated and installed. I think the 10 series of gfx cards play it fine. What are your specs?

The only fix I've found for it at the moment is to get a lower quality version of the scene you want (the GearVR or even Smartphone version) they seem to play a little better sadly at the cost of quality and a slight tunnel vision due to the different res. Or you can convert the file to H.264 using a program called 'Handbrake' which can be a pain in itself adjusting the settings and still at a loss of quality.

I know H265 is great for file size and quality but its getting really annoying now, it seems every other studios scenes are like this. I'd sooner sacrifice some more drive space for the quality than have to upgrade my PC to play a file.

2
frankyVR•

H.265 is a different problem, the studios mentioned by the OP are not using it.

In whirligig the VLC rendition engine give me the worst frame rates, it's only good if nothing else plays. For h.265 you want to try DirectShow with LAV codecs and the right settings with CodectTweakTool, for the best performance.

2
Mansquirt•

Yea I just realized OP noted CzechVR and Badoink which are usually fine for me. I noticed a few problems with Whirligig so have stuck with SimpleVR mainly. I tried tweaking the LAV codecs a couple of times but with no success sadly. Is there any tips or guides for doing it for H.265 VR?

2
frankyVR•

I tried a lot forwards and backwards with the Codectweaktool, and now it's in the state-never-touch a running system. Will look to find the link to the 'how-to' do the codec settings I was using or will upload some screenshots of my current settings(there it is).

I got an Oculus HMD and since the player need to use different proprietary libs for oculus and vive, there is a chance that our results are different even if we both would use same player, os, other pc components.

Edit: Link to my settings and recommandations

2
Biomon111OP•

Its strange, even if I view the "problematic" videos on my desktop with e.g. VLC player without my Vive, it takes some time to load and if i want to skip forward it takes about 2-3secs before the video starts again. Definatly a problem with the files

2
frankyVR•

I did a little google job for you... look here: http://steamcommunity.com/app/451650/discussions/0/364042262873027118/ and here http://wearestars360.nsccreative.com/setup That is exactly how it looks on my pc

I am using:

  • I5-6600, GTX970, 16GB RAM, Oculus Rift CV1

  • Win 10 64bit, nVidia Display Drivers 382.05, lav 68.1 codecs (configuration with codec tweak tool v6.06 as shown here: http://wearestars360.nsccreative.com/setup)

  • whirligig 64 Bit and DEOVR

Here some figures how things run on my setup (highest to lowest quality files):

  • h.265 3840x3840 (Hologirls-Oculus) 50-60fps
  • h.265 3840x1920 (VRBangers) 90 fps
  • h.264 3840x1920 (Oculus files of CzechVR, SexbabesVR, Badoink, VR3000, RealityLovers, and their co-brands) 90fps
  • h.265 2560x2560 (Hologirls-GearVR) 90fps
  • h.264 3400x1700 (NA-desktophd) 90fps
  • h.264 3200x1600 (WVR-highest) 90fps
  • VP9 3200x1600 (VirtualRealPorn-Oculus) 90fps

The fps figures are that what DEOVR displays in the settings menu, not sure how much validity there is. The lower fps for Hologirls-Oculus is sometimes notable but nothing I would name serious stuttering, all other files are playing without the slightest performance issue.

As I said, I don't know the Vive and how efficient it's drivers are and how good the player software supports it.

Our (/u/Biomon111, u/Mansquirt) HW has almost the same punch.

If you got less performance out of it, you should consider the following things for improvement:

Since our GPU don't have a HW-decoder for h.265 the accelaration comes from using some Cuda cores for computation. That's why we choose “NVIDIA CUVID” and not DXVA for HW-Decoding.

My drivers are pretty old, and the most recent LAV codecs seem to have more improvements for h.265 and hardware accelaration. Thus it seems I need to break from the 'never touch a running system' rule soon and will try an update.

2
scribjellyjr•

Deo VR allows you to control the SuperSampling and AA in the settings. If I have those up too high the video can lag, stutter, and desync. Try lower those.

1