New replacement v2 mini select and can't connect via usb... help! Error log below

Send: M105 Trying baudrate: 38400 Send: M105 Baudrate test retry: 4 Send: M105 Baudrate test retry: 3 Send: M105 Baudrate test retry: 2 Send: M105 Baudrate test retry: 1 Send: M105 Baudrate test retry: 0 Send: M105 Trying baudrate: 19200 Send: M105 Baudrate test retry: 4 Send: M105 Baudrate test retry: 3 Send: M105 Baudrate test retry: 2 Send: M105 Baudrate test retry: 1 Send: M105 Baudrate test retry: 0 Send: M105 Trying baudrate: 9600 Send: M105 Changing monitoring state from 'Detecting baudrate' to 'Closed' Changing monitoring state from 'Closed' to 'Error: No more baudrates to test, and no s...' Connection closed, closing down monitor

Posted Jul 27, 2017, 3:39 PM UTC

213
MrBreadWaterModerator (V2)•

You have to set Baud Rate manually. 11520 is the baud rate for the printer.

3
shell12995OP•

Now it's recognizing the bed temp and extruder temp but it says closed above them.

1
MrBreadWaterModerator (V2)•

Can you send a picture so I can see what you see?

1
shell12995OP•
1
MrBreadWaterModerator (V2)•

I don't see what's wrong it looks fine.

1
shell12995OP•

I changed the baudrate, now it says it's printing, the screen on the printer is displaying the extruder/platform temps and speed but nothing is happening.

1
corptech•

The same thing happened to me with my replacement, if I angle the USB upwards it connects but if anything moves it even slightly I see the same errors. Now I have a wad of blue tape under the USB connector putting pressure on it maintaining the angle.

Another replacement is on its way...

1