[Basic Circuit Theory] RLC Series Initial Values

✔ Answered

I only need help with part (a) of this problem. https://imgur.com/a/zEVxB

The answers are iL(0+)=0 and vL(0+)=24. These confuse me as to why they are. Because vC(0+)=24V, how can vL(0+)=24V as well? These elements are in series with each other, and added together, are 48V, which clearly isn't possible as the voltage source was initially 24V. I don't understand the reasoning?

For iL(0+), wouldn't the capacitor begin discharging, therefore we would see some nonzero current go through the inductor?

Posted Dec 8, 2017, 9:28 AM UTC

22
freefoodpls•

I think the solution assumes that current flows into the positive terminal of a device. In the figure, the inductor current is flowing right-to-left, so the + terminal would be the same + terminal as the capacitor. So vL(0+) = vC(0+), since they are the same node.

For iL(0+), current through the inductor cannot instantly change. You must satisfy iL(0-) = iL(0+).

2
abdex•

freefoodpls is right. The voltage across the inductor is 24 V, but its positive terminal is on the right, so when you add voltages starting at the lower right, it's +24 up the capacitor, then -24 across the inductor, 0 across the resistor. [at t=0+] So it satisfies KVL.

For iL(0+), wouldn't the capacitor begin discharging, therefore we would see some nonzero current go through the inductor?

Yes, you would see the inductor current start to change. Its value is still very close to zero, but its derivative is 24/L (recall v=L di/dt). Here's a pic

2