r/chemhelp•
Chemmqs

Removing silver nanoparticles trapped within a solid? Would love help from nanochemists!

Hello,

I do an inorganic reaction with AgNO3 and a ligand in wet DMF, with heat, yielding an insoluble polymer. DMF can reduce AgNO3 to Ag nanoparticles from what I've read, so do you have any advice / can explain what I am seeing?

I make the polymer in air but use foil for light protection. I heat it up, after several hours the polymer is made and there's a brown solution. I wash it with either methanol or more of the original solvent I made it in (wet DMF). Sometimes I see the immediate formation of large black particles when I wash with solvent. I attribute this to immediate aggregation of silver nanoparticles. Rinsing with the DMF solvent doesn't seem to get rid of nanoparticles (the polymer is still colored yellow at best or brown at worst). I found that washing with ethanol makes the crystals go from brown to orange/yellow to grayish/offwhite, and the offwhite polymer by SEM have no nanoparticles. Methanol does not help.

I am by no means a nanoparticle chemist, so if you have any ideas to get rid of the aggregation of what I attribute as large black Ag particles from aggregation, please let me know! I cannot avoid using wet DMF, I need heat, and I need AgNO3. Everything else can be changed. Theres a few ideas I have, would love if you can tell me which you think are worth pursuing:

  1. Wash with DMF or ethanol in the dark
  2. let the mixture cool down to RT before working when it might be slightly hot
  3. perform synthesis under inert atmosphere
  4. as Metal to ligand ratio is 1:1, try 1:1.2, excess ligand.
  5. play with temperature. possible to form at RT but unlikely. possible to form at a lower temperature than what I do, but unlikely.
  6. play with time.

I very well might try to do a reaction where I basically do 1 through 5. I am really curious to know how to prevent the sudden aggregation of Ag that I see. As they are two solids and have nearly the same density, I'm limited on what I can do. If something like adding sodium citrate will help after I formed the polymer, I am game.

Posted May 12, 2018, 7:58 PM UTC

49
dungeonsandderpInorganic, Metathesis, Polymers•

Centrifugation? It should be straightforward to fractionate Ag out of a polymer solution/suspension by density.

2
Killzonia•

Is there any feasible way to wash out the silver before you precipitate the nanoparticles? Something like HCl might help to remove the silver. (I'm not a nanochemist either so sorry for the stab in the dark type response).

1
ChemmqsOP•

So my goal by washing with DMF or ethanol is to remove what I assume is colloidal silver as a brown solution (ligand is white, AgNO3 is white, polymer should be likely white). I seem to be precipitating upon washing. I might try 2M HCl, but I'm not too sure how my polymer would like that!

2
Weatherman3040•

I'm not a nanochemist, but I know that sodium citrate is often used as a capping agent on the nanoparticles to prevent aggregation. Polyethylene glycol and a some thiols are used similarly. A variety of emulsifiers and surfactants can be used as well. I really don't know how those would affect your desired polymer, however.

1
ChemmqsOP•

So I might try adding CTAB or sodium citrate to my already likely colloidal suspension, and then washing with a good amount of DMF or ethanol? Seems like the most likely to work! I assume what is happening is I have remaining Ag+ in solution and when I get rid of most of it by decanting the colloidal suspension, I somehow aggregate the particles to form some black precipitate. Maybe adding citrate will cap it and prevent it from forming.

1
Weatherman3040•

That's what I would think. The only thing you might run into is that citrate can also function as a reducing agent and form the nanoparticles from AgNO3. It's reported in literature, but I've never had that problem. The caveat is that I've also never done a high temperature, hours-long synthesis with it. If the nanoparticles themselves aren't a problem, or if you already have a suspension of them, it'll be fine.

1
Drunkturtle7•

Hey there, I've worked with silver NP's once and if you focus on making them they can be really tiny (around 2 nm) and hence really difficult to remove. The only way you can remove it from the whole precipitate is with acid (nitric acid) as metallic silver is not soluble and you need to make ions of it to make them soluble in water.

I completley ignore what your reaction is about and changing the solvent won't change a thing the easiest thing you can do, in my opinion is change the DMF for an agent that doesn't recude the silver nitrate. I know you said you can't but as additional information that I found on an article once, to be able to reduce a a salt into a metal (efficiently) the electromotive force (EMF) values of the salt and the reducing agent must be far apart, the more difference between those two values the most efficient the reduction will be, meaning you can find an alternative of DMF with an EMF value closer to the EMF value of silver nitrate to prevent the formation on silver NP's.

I currently work with the synthesis of copper nanoparticles if you have any questions I could help with I'd be glad to help.

1

Hey, Drunkturtle7, just a quick heads-up:
completly is actually spelled completely. You can remember it by ends with -ely.
Have a nice day!

^^^^The ^^^^parent ^^^^commenter ^^^^can ^^^^reply ^^^^with ^^^^'delete' ^^^^to ^^^^delete ^^^^this ^^^^comment.

3
Drunkturtle7•

I just thought that using an ultrasound bath might help you remove the nanoparticles.

1