Chemmqs

u/Chemmqs


r/chemistry•

I've been dealing with some pre-polymeric material that loves to get sticky over time and acts as an adhesive . I am not very familiar with surface science nor surface chemistry too much, and I am wondering how the following terms are related to the ability for something to be an adhesive? I haven't found a resource that clearly demonstrates a relation between adhesion/tack and surface tension, wettability, mechanical strength, IMFs, etc. If I can influence one of those then maybe I can play around with the pre-polymers adhesion ability. In other words I want to know if I target the wettability/tack/surface tension of a pre-polymer, that will affect adhesion in a way that makes it better or

54

r/jobs•

A lot of my job searching has been sending out applications (100-200+, lost track) and hearing back from a external/internal recruiter (15-20 calls), at which point I'd get a phone interview (possibly 5-10 calls) and an in person interview (2 on-site).

Besides the classic email a few hours or one day after an interview, I hardly follow up. Am I missing opportunities, or do I hold the belief that if they really wanted me they'd let me know? I don't want to waste my time if they only half ass want me with no intentions to hire, if they had any quota to hit for # of people to interview with.

25

I'm the least moderate person in terms of "moderation is key". I binge, thats my thing. I'll listen to a song till Im sick of it. I've watched all of Friends in one month. I eat one recipe tiil Im sick of it and then never eat it for a year+. I go out every few weeks and drink a lot, but never drink at home.

I tried IF doing 2 meals a day and liked it. But its just hard. With fast food, I need to limit myself to 2 meals of not wht I want (e.g. chicken sandwich and fries vs burger and onion rings). With cooking though, 2 meals a day that are 1,000-1,200 calories each seems like quite a lot of food volume wise.

So what was your key for consistency? Whether its keeping a wide variety of food

43474

r/careerguidance•

I'm a chemist. I thrive off instructions, routine, and planning things. Can you help me get a gameplan I can generalize with both phone and in person interviews? I've gotten one offer, two rejections, and one marathon interview in person from four phone interviews...and three lined up for the next few days!! I want to make sure I don't fuck up and not bomb it. I bombed one due to being awkward with an awkward guy, and one bombing behavioral questions with a guy that didn't want to have a conversation and just wanted to hear what I had to say. Now I realized these are on me and I could've gotten further!

For phone interviews, here's what I plan on doing. Please critique it and tell me if

11

r/chemistry•

Some brief context: I have a M.S. with a diverse background in synthetic chemistry. In the past two months, more than 100 applications lead to about 10 screenings and phone interviews (all screenings went well, some of the technical interviews I had a a stumble or two in each), and from this I've had one rejection post-interview. I'm shocked because I was always told masters are more hirable than BS or PhD.

This said, I have a couple questions

  1. At what point do I search more broadly? Instead of applying to jobs in synthetic chemistry, when do I start to reach out to more analytical jobs or data scientist jobs?

  2. If I do end up getting a job that doesnt match my goal of being a traine

513

r/chemhelp•

My experiment:

Put several soluble cations with a heterogeneous chemical able to undergo salt metathesis (ex. Chemical-Na+ + LiCl--> Chemical-Li+)

Monitor change in concentration of each cation in the mixture

get % removal (change in concentration over initial concentration)

I can monitor the release of Na+, showing the exchange happens. I see 90% exchange.

I can monitor the change of concentration, but some % removal are negative, as in I "gained ions"??

I can compare the total % removal of ions to the releasing of Na+, and the numbers are vastly different. Without taking the negative % removal into account, I get 72% removal, more than 18% unaccounted for.

The calibration curves

45

r/chemhelp•

I made something that has 3 phenylimidazole units (see CAS: 7164-98-9) by an Ullman coupling. The NMR came back pure in both CDCl3 and DMSO, I just think I had to re-run it because CDCl3 gave me some insoluble precipitates.

I figured this compound is polar but should be soluble having 3 benzene rings, 6 nitrogen atoms, etc. In DMSO I seem to have more sample simply due to the fact that the sample peaks are higher than solvent, where CDCl3 i have poor sample to solvent ratio ... that very well could be because there is solids in the flask. I looked at an NMR I took awhile ago in CDCl3 and saw a similar, poor peaks:solvent ratio.

My question

  1. Do you suspect anything weird is happening or
46

r/chemhelp•

Hello,

I do an inorganic reaction with AgNO3 and a ligand in wet DMF, with heat, yielding an insoluble polymer. DMF can reduce AgNO3 to Ag nanoparticles from what I've read, so do you have any advice / can explain what I am seeing?

I make the polymer in air but use foil for light protection. I heat it up, after several hours the polymer is made and there's a brown solution. I wash it with either methanol or more of the original solvent I made it in (wet DMF). Sometimes I see the immediate formation of large black particles when I wash with solvent. I attribute this to immediate aggregation of silver nanoparticles. Rinsing with the DMF solvent doesn't seem to get rid of nanoparticles (the p

49

r/FortNiteBR•

When it comes to hiding I can do okay, but when it comes to 1 on 1 combat I just can't aim. I choke up and die, and any ranking I get is not because I can eliminate people, but its because I just wait around and people kill eachother.

assault rifles seem ok but dont give much zoom and have a narrow spread so aiming is hard. shotguns seem to kill me the most in one or two shots, maybe I should just be using that?

Want to get into this game but the combat seems to be a steep learning curve. Or maybe its really hard on console

014

r/Pets•

Usually I play with her with my hands, and of course pet her too. But now I think she has a hard time to distinguish play time vs petting time. I often sit on my bed and she lays near me, belly up, and usually I can put my hand near her without her biting. However when I play with her, she also goes on her belly and then rolls around depending on where my hands are. Lately I've been kicking her off my bed whenever she does that, but maybe thats too harsh and I need to just ignore her instead? She hasn't seemed to learn and it's not gotten better.

I realize I messed up by playing with my hands and not a toy, and by touching her belly with my hands (sometimes shes ok with touching sometimes

66

r/chemhelp•

No matter what boronic acid we use, I normally see a significant amount (~30% yield) of a half-reacted coupling. Say we had 1,4-dibromobenzene and we were coupling some boronic acid twice, what we would normally see is 1,4-substitution being our product, and 1-substitution with a proton where the bromine would be.

Is there a way to avoid this? I normally get 50-60% yield which is fine, but if there is something stupidly easy that I can do to push the yield to say even 70 or 80% (solvent switching, lower temperature, etc.) then I'll do it. If it's switching from iodo to bromo, that'd be feasible but not ideal (have to make the precursors)

If we can work backwards, we are likely forming H-Pd

16

r/chemhelp•

My knowledge of ochem is pretty weak, but I was wondering why these two seem to give different results regarding what works in literature and what you'd expect.

It seems the benzyl bromide is more reactive towards magnesium, and BuLi is more reacftive towards the aryl bromide. Why is this? Is it a pka issue for the sp3 carbanion for BuLi? Because from an organometallics perspective I'd imagine its easier to insert between a sp2 C-Br bond vs and sp3 C-Br bond.

Let me know with what you think would work well, and if you can convince me to use butyllithium instead of the grignard that I plan on making.

212


r/chemistry•

From your experience, what's the best way to work up a boronic acid synthesized from BuLi and the aryl bromide?

I read some papers involving a series of organic/aqueous extractions by modifying the pH for a heterocycle that is pH sensitive - personally I'd rather just collect the organic and run a column, but I've never worked with lab-made boronic acids, just bought ones, so I don't know how it goes.

34

r/biology•

What's the best way to use micropipettes for the best accurate and precise measurements?

I have two liquids that I add. One can be an approximate amount so I use a regular syringe, the other needs to be down to the microliter. I've never really been taught how to be accurate with it, but I do know the first stop / second etc.

I am using this to get out about 4 microliters and the droplet is just small enough to not drop on its own and thus needs to be kind of pushed to the wall of the flask, but when I do that I'm not sure if I'm inserting a ton of error by introducing more liquid that lies on the side of the pipette tip.

Is there a better way of going about this?

313