Dameware Remote Alternatives?

Hey all.

We're having ongoing problems with Dameware Remote Control on Windows 10 devices (mirror driver) even with their latest 12.1 Beta, so I'm looking for alternatives and recommendations.

I've heard good things about Bomgar, but looking to tap some smarter minds.

Any thoughts?

Posted Jul 26, 2018, 2:18 PM UTC

2175
dcdefiore•

Never had any issues with Screenconnect

18
msantangeloOPJr. Sysadmin•

Will give this a look, thanks!

3
PhroznGamingJack of All Trades•

In case you wanted another vote, I second ScreenConnect.

4
limp15000•

Also screen connect...

3
[deleted]•

[deleted]

2
phishin_ca•

Connectwise is a shithole of a company, but ScreenConnect is the bitches tits.

3
YungSammy•

this man speaks the truth

1
k0derkid•

Went from Dameware to Screenconnect here. So much easier to get to remote workers with Screenconnect.

2
YungSammy•

+1 ScreenConnect

2
[deleted]•

[deleted]

4
msantangeloOPJr. Sysadmin•

When connecting to our Windows 10 desktops the refresh rate is incredibly slow to the point of being un-usable. It's apparently been a known 'bug' since Win10 1709. They released a Beta 12.1 which didn't help us unfortunately. :(

8
wetnap00•

We have this problem here too

2
msantangeloOPJr. Sysadmin•

Always comforting to know we're not alone. :)

2
ShadowedPariahSysadmin•

Our Win 10 desktops have been fine, it's just our Surfaces that it fails to scale the screen at all, and the mouse doesn't line up with anything. And that wouldn't be much of an issue except 1/2 of our devices are now Surfaces.

2
ThyDarkey•

We are using an ancient build of Dameware and no issues on devices with win10

2
msantangeloOPJr. Sysadmin•

How ancient? When we were using Dameware v11 I think it wouldn't work at all.

1
ItWasTheBeardedMan•

This happens in our Environment as well but thankfully we are slowly going away from surfaces. I have found that undocking the surfaces fixes this issue. Seems to only happen when its docked with a monitor attached.

1
ShadowedPariahSysadmin•

Ah, that doesn't help us too much then, they're always docked when we remote to them. I've been meaning to open a ticket when I had any free time...

1
ItWasTheBeardedMan•

We're on version 12.0.3.4010 and have had no problems with any version of windows 10. Well except for Surfaces while on dock. Mouse shows up in different spot then were your actually pointing.

2
spyingwindI am better than a hub because I has a table.•

What is your use case? Are you a call center? Are you just needing it for remoting into your servers? Do you need to support your customers?

We use Bomgar and it just works^TM but is expensive.

If you just want to allow remote access to your servers, then Appache Guacamole might be a good fit, it does SSH, VNC, and RDP. It can also do session recording. It can also authenticate logins with AD/LDAP.

I've heard good things about ConnetWise.

Also this helps when looking for alternatives. Not all are good, but you may find something that works for you.

3
msantangeloOPJr. Sysadmin•

Public Edu support. Office of 6 technicians, lots of desktops and mobiles to support (Conservative estimate ~350-500 end points), not using it to connect to servers.

Thanks! I'll dig through them.

3
_maph_•

Can I come work for you? I’m a network and system admin for public edu. It’s me and 2 Help Desk techs for 3000 endpoints across 4 locations

2
msantangeloOPJr. Sysadmin•

We just had an opening get filled up. :(

1
colossus121•

6 technicians for all that hardware? What happens when an update takes everything down? You get to leave early?

1
wrabbitnyc•

Six technicians is actually a lot for that amount of hardware in my experience.

4
msantangeloOPJr. Sysadmin•

There's more. Lots more. That's just the Windows devices.

1
msantangeloOPJr. Sysadmin•

That's not even counting all the Chromebooks. Of which we just received 580 new ones to supplement the 700 old ones. We just can't use Dameware on them. :)

2
colossus121•

There's always chrome remote desktop. How does your team deal with supporting that kind of hardware churn?

1
HotBananaaSysadmin•

Did a test with screen connect and it was great. On our budget for next yr

3
msantangeloOPJr. Sysadmin•

Now ConnectWise control?

2
HotBananaaSysadmin•

yep

1
ipreferanothername"Good Enough IT" is not good enough.•

i was in love with goverlan a couple of years ago at another job -- the remote tool is really good, and the admin suite is great. i think they do subscription pricing now but iirc its per-admin/tech, not per-endpoint

3
azspeedbullet•

i love goverlan, it is amazing

2
msantangeloOPJr. Sysadmin•

Thanks!

2
Ros_Hambo•

AnyDesk looks interesting.

3
yonk78•

It's the smoothest out there. Highly recommend it

1
tigers258998Jack of All Trades•

Take a look at Comodo One. I consult on the side and use their software to remotely connect to all of the companies I work for. It's free and has other modules such as a ticketing system and patch management.

2
msantangeloOPJr. Sysadmin•

Never heard of this, but will be looking into it. Thanks!

1
CW_Jordan•

UltraVNC works a dream. Free and just works, so many customizable options.

2
msantangeloOPJr. Sysadmin•

I've used a different version of VNC in the past. Thanks! Will look into it.

2
n3rdopolis•

If you use that NT authentication plugin or whatever it's called, you're limited to 32 character passwords though

1
CW_Jordan•

We've just created sec groups and just authenticated by admin account on the domain

2
n3rdopolis•

Yeah, that's the component that has the 32 char limit. (VNC based auth has a limit of 8)

1
itdumbass•

I have 12, but I think all of my client machines are v11, and I've seen no issues on Win10.

[edit] I have used Bomgar, but it was 10 years ago, so I can't say anything about it with Win10, but it worked quite well at the time, though, as I recall, it was pretty expensive.

2
msantangeloOPJr. Sysadmin•

I need to capture a video of the lag for when I present findings, so I'll be sure to post it so you can see what we're dealing with.

1
an_indian_man_work•

Bomgar. Use it here.

2
Treebeard313MSP Engineer•

MSP Anywhere. Best solution I've ever used.

2
couldBworseSysadmin•

Bomgar is by far the best I've used. But expect to pay...

2
drbeerI play an IT Manager on TV•

Had Dameware - same problems as well as issues with video going black, some problems with leaving the mirror driver installed on PCs (USB displays hated them). Not to mention the big killer, the internet proxy worked about 1/10 times, no exaggeration.

Went to Connectwise Control (aka ScreenConnect) and have been very happy. Because its not on prem we solve the issues of off-network machines. It may not be "quite" as fast at full quality as dameware but the lack of problems and the fact that it just works made it worthy of a switch.

I will say, Dameware is stupid cheap. But your sanity is worth something and the time you spend working on problems it causes makes the case for ScreenConnect.

2
_maph_•

remote utilities. That’s the actual name of the product, believe it or not. Stupid ass name

2
[deleted]•

[deleted]

1
msantangeloOPJr. Sysadmin•

Hadn't considered it... Will look into it too.

1
[deleted]•

[deleted]

1
Szeraax•

assuming that you have DCOM on, you can initiate connections from admin machines and users will get a prompt for access and a second prompt for control (if requested by admin).

We use it and it works just fine. Allows us to avoid having any further potentially buggy remote access tools on our computers (especially important for people who work on laptops at other locations like airports or cafés or you name it).

You can access easily via manual command line too: msra /OfferRA COMPUTERNAME

1
msantangeloOPJr. Sysadmin•

The only issue with that is sometimes we need to control machines without user interaction. That is to say: if I'm working from home and need to remote control a desktop to install a one-off piece of software there's no one there to be logged in. I have to WoL the equipment then remote connect. Does MSRA support me connecting with no one logged in and then allowing me to login?

2
Szeraax•

No. 100% it is only for interacting via the Windows Remote Assistance program and gets you into usermode.

2
[deleted]•

[deleted]

1
new-fantomas•

Do you have SCCM at your company? This feature is built-in on any computer with SCM client. In SCCM console right click on the device Start->Remote Control.

1
oW_DarkbaseInfrastructure Engineer•

Probably one of my favorite features with SCCM. Although it lacks support for multiple monitors iirc.

2
new-fantomas•

Works OK with multiple monitors.

1
msantangeloOPJr. Sysadmin•

Nope, no SCCM, I just got them nudged into WDS and MDT. :(

1
Frothyleet•

Might want to look into it - EDU pricing might be reasonable. SCCM is wayyyy more than unattended access though so might be too much of a project right away.

2
msantangeloOPJr. Sysadmin•

It's on the to-do list, but needed more time to roll it out than I had, so we went WDS last year to MDT this year, and maybe, MAYBE SCCm next year. :D

1
ferrispd•

Ivanti Unified Endpoint management (lots of features, IT expert), or TeamViewer (easy for helpdesk guys)

1
ygritte__•

Obligatory screenconnect mention.

1