Need help tuning 40 meter whip
So recently I put a vertical antenna mount in my yard and connected it to 16 radials each about 16-25 feet long depending on how far I could stretch them out and put up an MFJ 40 meter whip. The antenna works well enough that I barely managed to work Canada from OKC, but while I was tuning I noticed something strange. I hooked the antenna analyzer up to it and it seems like being tuned to 7.350 which is obviously out of band. At that frequency it will give me a 1:1 SWR but if I let the stinger out a little and tune it to 7.200 the lowest I can get is 1.7 or 1.8. And if I try to tune lower than that it's at 2 and this continues the lower I try to tune it. My brother has a similar set up with more radials and the same antenna, and his tunes exactly the same. Does anyone know a fix to this or what the problem might be?
Posted Aug 6, 2018, 5:05 PM UTC
I believe your cable is 50 ohm and a regular vertical antenna impedance usually around 35...38 ohm. Without the antenna tuner your vertical should have SWR around 1.4 on the resonating frequency. If SWR is not 1.4 - something is not right.
Any idea what it might be or where I could start troubleshooting? I'm hoping it's not a matter of these antennas just being junk.
Sorry. A hamstick style antenna is very inefficient, even over a great radial field.