
TCFlashback65
u/TCFlashback65

I walked down 12th st from my house earlier and there was just about every kind of car you could think of cruising down the street. I was walking faster than traffic there were so many cars. I haven't been able to find anything on Facebook. Maybe someone here could shed some light on the subject.

A little (OK, really long) back story here: This started a couple years ago when we first got licensed and built ourselves a couple 2m quarter wave ground planes and put them up about 15' with make shift PVC masts. We could receive local repeaters but our goal was to work simplex only and that that set up didn't work. So the 2m radios got shelved and we spent some time studying for license upgrades. About a year later we both had HF radios and I had learned about ground wave propagation. So we set up some 1/4 verticals and again had no luck. So at this point, I'm thinking our only choice is NVIS. We end up making some 27-28' masts and make ham stick dipoles for 40 and 80 meters. Once again w
My current set up involves a bracket with radials in the middle of the yard that I use to screw vertical mobile whips or an MFJ 1979 depending on which band I'm operating on. So far everything works fairly well so I know there are no issues with the mount and radials. I use a mobile whip for 40 meters but I thought I would improve on my situation and hang a 32-33' wire from some branches that overhang the mount and attach the bottom end to the mount. So I tape a sock with dirt in it to one end of the rope and lob it over the tree with the top end of the antenna taped on to the other end of the rope. I pull the rope over a branch until the antenna is vertical, tie it off, and screw the bottom
I'm going to take my extra exam on Saturday and I'm trying to decide whether I want to get a new call sign or not. When I looked up the latest 2x2 sequential call sign issued in region 5 it starts with A. Why is this? And what exactly is the procedure for getting a new call sign when I've passed my exam? Any help is appreciated.
So recently I put a vertical antenna mount in my yard and connected it to 16 radials each about 16-25 feet long depending on how far I could stretch them out and put up an MFJ 40 meter whip. The antenna works well enough that I barely managed to work Canada from OKC, but while I was tuning I noticed something strange. I hooked the antenna analyzer up to it and it seems like being tuned to 7.350 which is obviously out of band. At that frequency it will give me a 1:1 SWR but if I let the stinger out a little and tune it to 7.200 the lowest I can get is 1.7 or 1.8. And if I try to tune lower than that it's at 2 and this continues the lower I try to tune it. My brother has a similar set up with
I've been learning a bit on my phone, but it would be nice to to learn in person, get some feedback, be able to ask questions, and actually talk to people who are also learning. Money is a little tight right now so prefer something that's not too expensive but I have no problem paying.
It seems that once the bike runs out of gas with the petcock in the "ON" position, and I switch it over to reserve it's not getting gas quick enough to keep the bike running. I've cleaned out the tank, replaced the petcock, and rebuilt the carb already and the bike runs fine with a full tank on reserve. Is this just a bad design for the tank that once you get so low on gas it just doesn't feed into the petcock? I usually end up only using about 1.8 gallons tops out of the total 2.2 and that's running it "dry".
Apparently the ignition modules (possibly aftermarket) on the 93 sportys use a 7 pin connector. I'm in the middle of trying to rewire my bike but I can't find these connectors anywhere except dynatek sells an adapter to an 8 pin for $45 (lol!). I'm almost to the point of snipping the connector off of the module and replacing it with a less expensive 8 pin but I'd rather not if I don't have to. Does anyone know if there's a place to buy these connectors? Here's a link to the laughably expensive adapter.



