Using a tree to support a vertical wire antenna?

My current set up involves a bracket with radials in the middle of the yard that I use to screw vertical mobile whips or an MFJ 1979 depending on which band I'm operating on. So far everything works fairly well so I know there are no issues with the mount and radials. I use a mobile whip for 40 meters but I thought I would improve on my situation and hang a 32-33' wire from some branches that overhang the mount and attach the bottom end to the mount. So I tape a sock with dirt in it to one end of the rope and lob it over the tree with the top end of the antenna taped on to the other end of the rope. I pull the rope over a branch until the antenna is vertical, tie it off, and screw the bottom end into the mount. Then I plugged my antenna analyzer in and the SWR is fluctuating rapidly anywhere from 1.3 to 3 all across the band. If I lower the top of the antenna it stops fluctuating but then the SWR is too high and the bottom of the antenna is sagging across the ground and radials. I have kind of narrowed it down to a few things but I thought I'd see if anyone here might be able to lend some advice as I've been having a hard time finding anything from googling it.

The first thing I figure it could be is the leaves in the tree. However, they touch the 1979 sometimes and it doesn't ever effect it.

Second idea is the rope that is taped to the top end of the wire might somehow be conductive? I'm pretty sure it's just nylon rope.

Third is the wire. I used 10 gauge stranded and so far I've seen no one use that kind of wire for antenna so I might have screwed up there.

I know the problem is with the antenna itself because I've tested everything from the mount back to the radio and everything else is working great. Any ideas would be much appreciated.

Posted Sep 23, 2018, 12:16 AM UTC

31
WizerOne•

Search "Ground mounted vertical" on YouTube!

2