No22 Little Wing
Posted Jul 7, 2019, 10:35 PM UTC
49948
- No22 Little Wing 56cm, purple anodized titanium. Drilled fork and bottle bosses added for an alternate road setup. Frameset includes seatmast topper and headset.
- Zipp Service Course SL80 stem, -17deg, 130mm
- Zipp Service Course SL80 bars, 38cm
- Supacaz Super Sticky Kush bar tape
- Ergon SR Pro saddle
- Sugino 75 DD2 cranks and included bottom bracket, 165mm
- Shimano PD-R7000 SPD-SL pedals
- Sugino 75 51t chainring
- Dura Ace 15t cog
- KMC K710SL chain
- Mack hubs, front is low flange 24h, rear is sheriff star 28h fixed/fixed. Includes a pair of beefy lockrings.
- Sapim CX-Sprint spokes
- Boyd 44mm carbon rims
- GP5000TL tubeless tires, 25c
Yes, my valve stems are too short. My pump still works so I'm making it work for now.
The alternate road setup will use a shorter/taller stem and wider bars, and will include TRP RRL Carbon hoods/levers. The pictured configuration is for track racing.
Photo by Roman
28
Do you have weight measurements for both? This is gorg
4
The bike is 15.6lb / 7.1kg as pictured. Road mode will be slightly more with the addition of the front brake and levers, but I probably won't be getting around to putting that together until the fall.
7
17.1kg ?!? You sure you weighted it right ?
3
Oops, bonus 1! Fixed.
6
Are you set up tubeless? At what pressure?
1
Yes - 105-110 PSI.
2
Crikey.
1
Is this on the Charles River Greenway in Allston, MA?
7
Keen eye!
6
Yeah haha, recognized the dock and the width of the river/bridge looked like the Charles!
3
I have a Drifter in the same color, I love it! Enjoy the bike, it’s beautiful!
5
How is this bike standing? What’s your magic?
5
There's a hand supporting the front wheel that I photoshopped out - you can still see it in the bike's shadow :P
11
no22 bikes have to be my dream bike. I live in nyc and whenever I see these on special occasions in traffic I drool.
4
Beautiful
3
Such a sick bike
3
Damn. That color scheme, and the flawless cockpit setup is awesome. I use that same stem on my road bike, if nothing else because I love how it is parallel with the ground. I also thought I was the only one with a 13cm stem
2
bike done right
2
Perfect bar tape choice
2
Literally my dream bike....too expensive for me rn 😭
2
stunning 😍😍
part of me just wishes i spent all my budget on one of these framesets rather than building the sprint track, and just admired it until i sold an organ to buy components.
1
Yeah, this is the good stuff.
1
Sexy bike m8. Congrats on the build!
1
Killer build man. I've been saving up for a pair of carbon wheels and was looking at Boyd rims. How do they ride?
1
I'm happy with them, though I've only ridden on them a couple of days under nice conditions. They seem very rugged - I banged them around on some bad pavement to help seat the spokes and they behaved just fine. I haven't exercised the braking surface yet, though I intend to eventually. The wheels came with a set of carbon-friendly brake pads which was a nice touch. This was the first wheelset I've built so I was looking for rims that were sparing with the gimmicks and something comfortably middle of the range. I interacted with their support a little bit and they were nice people. I did have an extremely difficult time mounting these tires, not sure what that was about.
1
Such a lovely frame!
1
Jamminy Chrassmus...
1
What a sick bike dude
1
yup this is it
Your statement is correct I can't stop drooling when looking at this bike.
when you are shopping for a bike and the one bike that instantly convince you.
then you realize it's $3000 and drop the idea
or worse...don't drop the idea :(