DIY Induction Heater Build (First Attempt)
Planned & designed over two weeks. Assembled this weekend.
Pleased with the results for my first attempt.
Pics & video at the jump: https://imgur.com/a/7fGWgMa
Posted Sep 30, 2019, 3:59 PM UTC
56
Planned & designed over two weeks. Assembled this weekend.
Pleased with the results for my first attempt.
Pics & video at the jump: https://imgur.com/a/7fGWgMa
Posted Sep 30, 2019, 3:59 PM UTC
Great Job if it works for you that is all that matters!💯
Not digging the rocker switch, your going to forget it's on and burn the place down!
I recognized this as a potential issue after ordering my parts but I’m very conscientious when using it and unplug the heater immediately after use just to be extra safe.
Also, the switch is rated well above the other parts so I stuck with it for this build.
Next time I’ll use a different type of switch.
Wouldn't the risk of fire be not terrible since its an induction heater not a heating coil?
what's the box you got? Im gonna do this shortly off of the build guide, but need a good smaller end box
I used a 4x4x4 electrical conduit box from Home Depot. Spent a week looking around for a solid wooden box but didn't find anything I was happy with so I went with this option. Will continue my search for wooden boxes on any future builds (or I'll just make them).