r/DIY•
thumbnail

Need ideas for an old AM Radio Cabinet

I inherited an old AM radio cabinet similar to this, and am looking for ideas to repurpose.

My intention would be to restore the outside to a good-as-new look, but add some function to a rather large piece of furniture that was only used for AM radio. The cabinet has plenty of empty space, a 10 or 12 inch mounted speaker (most likely dry rotted) in the front lower grate, and an old AM radio that would need restored (but may never work again?). I will probably remove the speaker and radio, but like the look of the cabinet (plus my grandparents bought it new). OR - Is it a sin to not restore it to its original AM glory?

My ideas:

-House my subwoofer for livingroom surround sound

-Media server

-Extra storage

Any other ideas?

Also, any experienced woodworkers have any suggestions for removing the old finish delicately? I have all types of sanders, but not much experience with chemicals or heat guns.

Posted Oct 6, 2010, 3:46 PM UTC

621
[deleted]•

Get it valued before you do any thing, unless the outside is battered to crap. Some of those old hand finished radios are worth $.

8
middlegeek•

Definitely do this. You might be able to make something cool out of it, but if it is worth enough, you may be able to get cooler things with the scratch.

2
thumbnailOP•

The radio inside looks sort of like this but without the display. Just sort of a metal box. The outside is ok, but the legs have a few dings. I am fairly certain that it's not worth much, but, short of going on the antique roadshow, where might one appraise such an item?

1
[deleted]•

Whats the brand? might be able to search auction sights get an idea.

2
2cats2hats•

Media server running subsonic.

Load it up with everything you can find up to the early 70s.

Donate to a senior's home.

3
[deleted]•

[deleted]

2
thumbnailOP•

I like this idea.... I have a nice liquor shelf, but this could be a good hiding spot for the more expensive stuff.

3
b_sinning•

Use it as dead hooker storage.

2
AthlonRob•

Put a pony keg in it? Pull on the volume button (or anything really) to access a nozzle and hose. it could feed out like a sprayer hose in a sink. put the back of the housing on hinges to display the refrigeration and the keg for easy access to replace as necessary.

2
thumbnailOP•

yum.

1
crashorbit•

refinishing antiques is almost always a mistake. Cleaning the grime off with mild detergent will probably be enough.

If you can make it work then it's probably valuable as it is. typically it's the old capacitors that go bad.

Beyond that I'd say go for what ever you want it to be. Though a media server/pc case sounds like a cool idea.

2
Erinjb•

We turned ours into a media server. We have all of our current gaming consoles, a built in server, and the usb turntable (which is my nerdery, not my husband's.) We plan to get the 5.1 based out of there soon and I'm toying with the idea of getting the old school consoles set up in there too.

2
systemlord•

I hope that thing is very, very well circulated in terms of airflow. Or you will greatly reduce the life expectancy of your electronics.

1
Erinjb•

We have a few ginormous fans and the back is open.

1
theenergyblog•

Just curious, Is yours in that good a shape? What brand/model? Doubt it has much "antique" value, but a few do. Remember most antiques are worth much more with their original finish!

1
thumbnailOP•

I will update with real pics as soon as I can get my camera battery charged. I doubt it's worth as much to anyone other than me for nostalgia.

1
gomexz•

I say upgrade the radio. Clean it up and put in a new speaker and a AM/FM tuner.

1
noiseboxg1•

I actually built a PC out of one of those a few years back.. LCD mounted in the front.. watercooled..

If was fun but took up way too much room.

1
crumbles2•

giant theremin

1
omgwolverine•

This article might have some info. Link to original article.

1
theenergyblog•

I forgot to put in my original reply. Do NOT use a sander. Most all of this stuff was veneered. A sander will ruin it. AS I noted, if it has value as an antique, refinishing it will severely destroy it's value. But, if it is not valuable, take the old finish (which is likely varnish) off with stripper. (not heat guns, that may de-laminate the veneer).

1
Bandow•

You could try and convert it into a super classy aquarium.

1