[Review; Squonkvember, day 10] BB Vapes B2K
Last RDA of week two of Squonkvember. Hopefully it ends with a bang.
BB Vapes B2K
Nas - Illmatic
murder is the case that they gave me
Table of contents
- Hard facts
- Soft facts
- Totally personal take
- Pros/Cons
- Squonkvember
- Disclaimer
Hard facts
- Measurements (without drip tip and 510) 23*22mm
- Build deck standard postless deck
- Airflow standard two-sided airflow, ranging from MTL to almost fully open
- Something noteworthy about the goodie bag? fuck yes; you get:
- an airflow reducer ring
- a chamber reducer
- a spitback guard
- and four sets of the following (Ultem, white Delrin, black anodized aluminum, sandblasted stainless steel/white frosted PC)
- top cap
- beauty ring
- 810 drip tip
- 510 drip tip
- 510 adapter
- two different heat fins for the cap
- Anything else? the above is included in the 5th edition and actual package contents (as well as a couple of minor things on the base itself) differ from edition to edition
Soft facts
When I watched the first review for the B2K, I fucking wanted one. Yes, I'm a superficial sucker for nice and shiny things, as well as for the possibility of either matchy matchy or color blocking, and the B2K offers exactly that.
As such, opening the box felt like Vapemas.
Look at all the contents for fucking sake!
So much potential for mix and (mis)match, I was pretty close to a boner. As much as I adore all that beautification stuff, though, I have to see I'm even more impressed by the fact that there are also pieces included that change the way the B2K vapes. We get a spitback guard, which threads in any and all of the 810 drip tips (doesn't change the actual draw, but, well, guards you against spitback. I have to say, I never get spitback, so I'm not going to use it, but it's still a nice inclusion.
Next up, we have a chamber reducer. And, in contrast to PEI inserts from other RDAs, this one actually reduces the chamber say whaaaaaaaaaaaat?! Yes, it fucking does. It just doesn't change the chamber height, something that I honestly think in the end doesn't impact the experience as much as other people believe, it changes the horizontal dimensions, which helps a lot with focusing the airflow towards the coil. In order to achieve this, there are extensions for the airflow inside the PEI piece, so right off the bat, we get a tighter draw. Of course, as heat resistant as PEI is, it's still plastic, hence pay attention that no part of your coil touches it.
NB: in some versions of the B2K you also get an MTL chimney, which is threaded into the chamber reducer for an even tighter draw; why this piece was scrapped, I don't know.
Now to the, in my fucking humble opinion, very best piece that I've ever seen included in an RDA. Fuck, in any vape device. Something that even tramples over innovations like squonk bottles with topfill.
This fucking ring:
You put it around the deck, on the bottom of the base, which raises the top cap, and your airflow is cut in half. Seriously, think about it. They designed a piece, made from scrap metal, that costs pretty much nothing to produce, and you get twice the AFC action. Without any need for structural changes to either the base, the deck or the top cap. It's just a fucking ring. The nice part is, that once you put one of the beauty rings on, it vanishes so it doesn't fuck with the well-chosen style you came up with. Fucking bonkers, this is true innovation without fucking over something. Deeply impressed by that.
But that's not all in terms of well-designed stuff that the B2K has going on. Need a spare grub screw because you just lost one? Why not take the one that's stored on the deck? Want to change from squonk to non-squonk mode or vice versa? Just screw a grub screw into the 510 pin. Afraid of juice leaking out of the 510 connector? Have a look at the O-ring on the bottom of the base.
storing shit on the deck *two thumbs up*
Overall, the R&D that went into the B2K puts a lot of drippers to shame; so many are released with nice little touches here and there, the B2K is nothing but nice little touches. However, there are some minor nitpicks I have; for whatever reason (personal preferences probably), they neglected these thingies:
First of all, it's a postless deck. I don't like them, but whatever. What I, however, do care about, is the lack of any guiding tool for the lengths of your leads. We already have notches for the coiling rod, so a little mark on the base would already have been more than sufficient.
Second, the airflow slots. On the first rendition of the B2k, the airflow slots would end one or two millimeters above the deck, on the version I have, the end right on the deck. The way I put my coils in (air hits the bottom and goes slightly under it) induces the need for me to install the coils really really low; in fact, I can't go as low as I wanted, because of shorting.
Third, the build deck. Sadly, there is only one screw per post; I would have loved to see two. Not having to think about the way I wrap coils is always nice, and it would have made dual coils a bit easier (still easy, though).
Lastly, the 810 drip tip. It is way too short for my liking, so I want to use another one. However, most are way beefier than the included ones, which means I get some serious overhang, because of the way the heat fins are shaped. So much style, but it doesn't accommodate every drip tip ;(
I guess you can tell I'm fucking excited about the B2K, let's hope performance can keep up.
Let's start with the draw: You can pretty much go from the Wasp Nano (fully open) to the Venna (reducer ring, closing down the airflow, putting the chamber reducer in). In terms of versatility, this is only matched by the MavT. This is fucking bonkers. The more open I go, the louder the airflow gets. Also, it tends to be a bit whistly. The draw, however, still is smooth; although I have to say, the noise is kinda distracting.
As I said, in terms of airflow options, the B2K is versatile as fuck, and the same goes for building options. No matter if you go Wasp or Venna, performance is nothing to worry about. You can even comfortably go for dual coils, and the B2K handles them just fine.
NB: putting a normal single coil or two coils in is really easy; using the reducer complicates the fuck out of the B2K. The holes for the leads are far apart and right above them you'll have the Ultem insert. So, I had to first bend the leg away from the Ultem and then, right where it transforms into the actual coil, I had to bend it again. It's also quite problematic that you kinda have to put the insert on after installing the coil, so you kinow only at the end whether you touch the Ultem or aligned the interior of the coil with the wicking channels of the insert. Really finicky IMHO.
They only caveat about building is, that you can't just couldn't throw one of my go-to coils in and call it a day. Not only because there are so many airflow options, that I had to fiddle around a bit, the B2K needs, at least in the standard configuration (single coil, no chamber reducer, 810) rather specific builds. While there is no necessity for using wire that's exotic as fuck or a shit ton of wraps (so no need for excessive amounts of mass/surface area), the B2K wants big coils. 3mm are the bare minimum in terms of ID, better yet going with 4mm. The deck is so freaking spacious, you really need to fill it.
Once you got a balanced build, you are in for a fucking treat. Be it Venna, Wasp or dual coil, I got a fucking bangy experience.
Overall, they only draw back of the B2K is, that in my opinion it's not beginner friendly. You have to have a bit of experience, so you can somewhat guestimate what mix of coil dimensions, wire type and airflow options will deliver the vape you are after. Of course, I don't want to discourage anyone, but back when I started building, I would have raged quite hard because of the lack of plug'n'play. You need a couple of different wires, you need to know your preferred coil height, you need to be comfortable with guestimating the lead length and so on. However, if you like to tinker, by all means, try to score one even if you just started out.
Totally personal take
So many RDAs offer a fuck ton of airflow options, and so many times the result is either lackluster, because the set-up just doesn't support the suggested range of coils, or too many compromises have been made so the atty ended up as something very weird.
The B2K, however, truly is versatile. The only thing that needed to be sacraficed was the ease of finding a working build; it took me three approaches, to find a set-up with the right ID/leg length/wire, but since then the B2K has offered one of the most fun vape experiences I've ever had.
In terms of performance, it's not God tier, but it's close enough; the joy it delivers makes up for it more than enough. And please, don't me wrong, performance is still awesome, it's just not Basic level. Also, it's the first RDA to rival the Wasp Nano, which is something I've been waiting for quite some time now.
One of my most favorite RDAs :)
I want a second one. Anyone got a spare?
In terms of music, I went with a classic. Of course, going with the Wu-Tang clan would have been an obvious choice because of the Branding (we have the 4th chamber edition and that laser edging eluding to C.R.E.A.M.); also, there is some rawness to the draw that goes really well with the Wu-Tang sounds. However, all the reviews I watched went the same route, so I opted for something different: Illmatic by Nas. Just like Wu-Tang, it's some OG stuff, with a very raw style and it also feels very close to the street. Life's a bitch, but the B2K certainly ist, yo!
Pros/Cons
| Pros | Cons |
|---|---|
| shit ton of stuff in the box | |
| shit ton of beauty stuff | |
| shit ton of stuff with actual functionality | |
| shit ton of airflow options | |
| shit ton of building options | you have to have a bit of experience to get the most out of it |
| airflow is actually smooth | but doesn't feel like it because the B2k is rather loud and a bit whistly |
| fucking nice flavor |
Squonkvember
Really nice way to end this week; lots of weird and unique things going on; performance-wise I had more impressive selections, but at least each and every RDA offered something pretty unique. And the B2K kinda kings it. So many nice little touches, all the beauty stuff, all the versatility and fucking good performance.
So, what's next week going to be? Also weird and a bit less than I'm hoping for? Or as fucking bangy as week?
| RDA | Airiness: sucking on a straw to barn door | Smoothness: fasten your seat belts to butter | My thoughts summarized with an ASCII | Star review | Final thoughts |
|---|---|---|---|---|---|
| NarEA (SXK) | ■■□□□ | ■■■□□ | ლ(ಠ益ಠლ) | ★★☆☆☆ | One of the better performers, but the fact that juice doesn't get sucked back into the bottle but lingers in the airflow channels kills this one for me. If you don't mind giving special attention by only squonking lightly, add two stars. |
| Skyfall (Coppervape) | ■■■■□ (biggest insert) to proper MTL (smallest insert) | ■■■■■ | ԅ(≖‿≖ԅ) | ★★★★★ | The accompanying ASCII is called "touchy feely" and I somehow find the creepy vibe it gives off very fitting for the way the Skyfall looks. While not the very best performer, still a very good one and ample airflow options. Still not a fan of airflow inserts, but that's probably my problem. IMHO a great beginner's RDA. |
| Hadaly (Shenray) | ■■■■□ | ■■■■□ | ''⌐(ಠ۾ಠ)¬''' | ★★★★★ | flavor-wise, it's the best RDA in its airflow bracket; the draw is quite a lot fun, but unfortunately, the whistly/slightly turbulent draw takes away just enough of the fun in order for me to still prefer the Hadeon and the Shogun. However, the Hadaly is still bonkers. |
| FeV BF-1 (Ulton) | ■□□□□ | ■■■■■ | (•̀ᴗ•́)و ̑̑ | ★★★★★ | I've vaped on some sick bangers, none of which came close to the Basic. This one does. 'nuff said. |
| FLVR (SXK) | ■□□□□□ | ■■■■■ | ♥ヽ(´ー`)ノ♥ | ★★★★★ | that flavor, them clouds, that joy :) one of the very best RDAs, no questions asked |
| Le Dripper (Vazzling) | ■□□□□ | ■■■■■ | {ಠʖಠ} | ★★★★☆ | if the AFC would be different, and I could change the drip tip, this would join the ranks of the sickest RDAs. Not quite their performance level, but close enough. Overall, a missed opportunity in my eyes. |
| Fumytech/BD Vape Pure | ■□□□□ | ■■■■■ | “ヽ(´▽`)ノ” | ★★★★★ | sleek looks, sick performance. I dislike postless decks in general, and the one of the Pure especially. Still, one of my favorite RDAs. |
| Riscle Pirate King v2 | proper MTL | ■■■■■ | щ(゚Д゚щ) | ★★☆☆☆ | finding a fitting coil and getting it in is way too much effort; still performance is decent and I kinda like the skeleton giving me the finger. At the end, though, this one could have been so much better. |
| Biochip (SXK) | ■□□□□ | ■■■■■ | (´・_・`) | ★★★☆☆ | overall, a decent performer, that I would surely use if it wasn't for heat problems. |
| BB Vapes B2K | whatever the fuck you want | ■■■□□ | ⁽⁽ଘ( ˊᵕˋ )ଓ⁾⁾ | ★★★★★ | The Venna, the Wasp and a dual coil RDA wrapped into one package. A shit ton of accessories. Awesome performance. What a fucking great RDA. |
Info & Disclaimer
- The BB Vapes B2K was bought with my own money.
- All of my reviews along with my recommendations can be found in this reddit post. If you enjoy filtering and sorting, I also packed my summary tables into a goggle spreadsheet.
- I'm a lazy fuck. And English isn't my first language, so please bear with me.
- A proper disclaimer can be found here.
Posted Nov 22, 2019, 4:10 PM UTC
Good stuff. Nice to see some design decisions that actually work.
I don't necessarily see it as a con if something isn't beginner friendly, as long as it performs. There are plenty of beginner friendly RDAs, so it's kinda nice to see something that will reward a bit of effort with a great vape.
Looking forward to next week!
yeah, that's true, it's not a con per se, but it's worth pointing out that it's not exactly a plu'n'play experience
a lot of people don't like to tinker, I guess, so I didn't want to give the impression that it's an RDA worth hunting for everyone