r/Phanteks•
Lexons

Plasma cut the Evolv Shift front panel, details in comment

Plasma cut the Evolv Shift front panel, details in comment

Posted Dec 1, 2019, 5:24 PM UTC

3023
LexonsOP•

I designed the pattern myself and took it to a local CNC Plasma shop, they offered to cut it for just €20.

After the cutting, which took around 2 mins, I grinned the edges smooth myself - I am surprised to say the paintwork is still fine after cutting and grinding. (The mesh is just held on with the plastic parts on the side)

The thermals have improved with 15°C on the CPU and 11°C on GPU, I'd would recommend these kind of mods over the mesh side panels, especially if you are using radiators.

The front two fans spin at 400rpm less after the modification, which drastically helps with noise levels during heavy loads.

I have uploaded the files I used, there are 2 patterns available in both 2020 and 2013 versions, one course one and a fine one (I used the course (PATTERN #2) one for plasma cutting):

AutoCAD 2013 (DXF): https://drive.google.com/file/d/1Bb2MU0Tn6TcxOq8x6jJnPMNSZG6EYYmC/view?usp=drivesdk

AutoCAD 2020 (DWG): https://drive.google.com/file/d/1BYPKrKbU4pG063qKV1Qd7a686ixr8HLE/view?usp=drivesdk

Edit: spelling + additional info

6
janphil_•

15/11 temps are incredible wow. I can't even achieve that with an H80iV2 in the evolv Shift air.

How do you do it? Is it all because of this CNC cutout at the front?

Right now I have my cpu rad as push-pull config at the bottom acting as intake, front fans (top exhaust, bottom intake) and GPU fan faced outwards toward mesh panel

I get idle temps at 35c

3
LexonsOP•

15/11 temps are incredible

These are not my idle temperatures, they are the difference between before mod and after mod under full load.

Before cutting (stock Evolv Shift glass panels), full load:

  • 47°C CPU
  • 64°C GPU

After cutting (modded Evolv Shift glass panels), full load:

  • 42°C CPU*
  • 53°C GPU

*This is not the 15°C improvement I stated before, I didn't let it run long enough for the H60 to heat up properly.

So my CPU has gone down by 5°C and GPU by 11°C just with cutting the holes, but like I said in the main post, the front two fans currently spin at around 300rpm LESS, which lowers noise a lot.

In both tests I have the CPU radiator as exhaust at the bottom (get rid op CPU heat as fast as possible) and both front fans as intake (get as much fresh air in towards GPU and Motherboard)

1
janphil_•

Gotcha makes much more sense now. Still those temps are great especially for the TG version of the case.

I'll definitely get my front CNC'd then.

Do you think with the H80iv2 I should put it as an exhaust push pull with two front intakes? Keep in mind I have the mesh panels on both sides but I do have plans to switch the motherboard panel to TG eventually.

2
LexonsOP•

I'd consider cutting, I am not sure if the GPU temps will improve much if it's already facing a mesh side panel. As for the radiator, I only placed mine as exhaust to keep as much heat out of the system, you can always try to flip the fans around. It took me a while before I settled on front fans intake and the radiator exhaust config. Just make sure to run a stress test on both CPU and GPU for a while (the CPU radiator really needs time to heat up).

Maybe try a stress test with front panel and without, if there's a massive improvement in temps (say over 6°C) I'd go with cutting. If it doesn't really matter if the front panel is on or off, I'd say play around with fan configuration.

1
KTheory9•

it does look like the designs in Star Wars

Great stuff Thanks. Been looking to move to this case for over a year, but waited for some mods. I saw this one on Instagram that looked amazing. https://www.instagram.com/kase.customz/?hl=en

If I can't ge the DXF file from him, I will definitely use yours in the coming months when I decide to update.

2
StumptownRetro•

Looks like Imperial design from Star Wars. I dig it.

5
LexonsOP•

It matches with the top panel, but it does look like the designs in Star Wars

2
pfiffocracy•

Do you mind sharing what's in your shift case?

2
LexonsOP•

AMD 1700x,

Asus Dual 1070,

Asus Strix B450-i Gaming,

Corsair H60 (2019),

Corsair SF600,

Front two fans as intakes, CPU radiator as exhaust at the bottom.

2
pfiffocracy•

Thanks! Do you think with this mod that you could keep thermals to a reasonable temp without the AIO and just air cooled CPU radiator?

2
LexonsOP•

I think so, having the top fan as exhaust could help get rid of the hot air from the CPU cooler, just bear in mind that the CPU cooler has a tight height restriction.

But I will say that around 1cm between the glass and CPU fan will be enough, most people will tell you to never put fans against glass but it doesn't really effect airflow as much as you'd expect. Here is a reference video that experiments with a fan against a wall: video (YouTube)

2
pfiffocracy•

Thanks for the reply. I guess the trick would be finding a CPU cooler with the proper dimensions. I'm not against getting an AIO but I would like to go air if possible.

2
Godzillasayshi•

I need something like that for my evolv ATX tg.

2
LexonsOP•

If you have experience with AutoCAD, you can just copy/paste the pattern layer from my design into a design with the ATX TG.

2
Truuberr•

Made some itx panel mods with same pattern. Laser is nice

2
LexonsOP•

Laser is nice indeed, mind sharing some pictures of the mods?

1
Truuberr•

Could do that yes. Need to make an epic photoshoot

1
lundsvin•

Looks amazing. Planning on doing something like that.

1
LexonsOP•

I am uploading the files now, I have included 2 options, small and large slots. I used the bigger size (looks better and easier for plasma cutter)

2
kfareda•

I don't have any experience with AutoCAD but would love this for my Shift X. Any chance someone would be kind enough to create a Shift X version?

1