Ice biomes, gas transport, and other noob questions

Sorry for all the questions! Trying not to clutter things, so I waited and just made one post:

Do ice biomes actively remove heat energy from the world? Or do they start with a significantly lower energy, and eventually rise to equalibrium with the rest of the world? (assuming I punch holes in the abyssalite boundaries to allow transfer).

Can I read the temperature of a gas/liquid tank with an automation sensor? Instead of running a cooling loop, I was thinking of pumping geyser water into a tank in the ice biome, and then a sensor would empty it back into the main base once that tank full had sufficiently cooled. I could make a pit, but just the tank building would be cleaner/easier.

I want to make a chlorine room. Running a pipe is much too far, so I have to bottle it (or mine bleach stone). Can I go directly from bottle to pipe? Or is my only option to release it in a small room, then pick it up with a pump? This of course introduces contamination to my pure bottled gas.

Are plant requirements a simple yes/no? Or will increased light, denser atmosphere, etc promote faster growth or greater yields? Doing muck wood and bristle berry right now, but curious about all plants. Farm vs hydro?

For decorative plants, does container matter? Floor, wall, hanging, etc.

Can I group select wild plants to enable auto harvest?

Is there a way to copy/paste designs? I wish I could copy my chosen pattern of tiles and mesh blocks to quickly create more 'floors'.

Is there a shortcut for creating an item that is already created? In Factorio, if I put my mouse over a structure and press 'Q', that structure type is now selected and ready to be created, just the same as if I went into the build menu and selected that item. Saves a lot of time searching through menus looking for a specific building.

Posted Feb 3, 2020, 9:41 PM UTC · edited

29
bratke42•
  1. No, they don't actively cool. Some wild wheezles might tho ofc

  2. The plan with the tank would work, BUT the temp sensor can only be put on pipes and the water in this pipe would cool a lot faster then the one in the tank because it's much more of it in the tank. So the temp you get in the pipe wouldn't match the temp in the tank. (Manageable by putting the temp limit lower then you want your main portion of the water to be and attach a buffer gate)

  3. Lay those pipes for the chlorine room. Your solution sounds way to complicated and would take a lot of dupe-time. I can't see this being worth. Or I don't understand your plan. You can bottle from gas pipes but not the other way around, if I'm not demonstrably wrong

Edit: it's a yes or no. The only difference is between cultivated or wild plants. Hydro tiles are only usefull for plants that consume water (f.e. bristle) but you should be carefull that the water isn't too hot, that will ruin them quickly and heat up your farm Edit to the edit: there is farmers touch wich gets plants to grow much faster

Edit2: the container only matters a bit. There is the lategame hanging pot that in and of itself has a high decor value (esp when build from diamond) and thusly boost the overall decor bonus.

Edit3: for blueprints you need a mod

Edit4 ;) : B is your new Q

4
bratke42•

Dude, you need to stop editing, I can't keep up :)

2
SplendiksOP•

Haha! Sorry, I keep thinking of stuff!

1
SplendiksOP•

The reason I want to use bottles is that it would require a run of about 150 tiles, for what should hopefully be a one time fill for a tiny room (4x3?) housing a water tank to kill slime water germs. If I never open it (probably no door), I would have no need to ever add more chlorine, I think.

1
MarsTraveler•

You can run the piping, use it for a short time, then delete all the piping. You'll get back 100% of the material you put into the pipe.

If running pipe really isn't an option, you can use a had bottler to put can into portable containers. Then you need a gas bottle emptier to release the has into the room. There is no option for releasing had into a piped system unless you download a mod for that.

1
SplendiksOP•

Thanks for all the edits :)

1
henrik_se•
  1. Ice biomes are cold because of all the cold stuff in them, and the wheezeworts add a little bit of cooling. Over time, and without insulating abyssalite, everything will equalize.

  2. No, you can only put sensors on pipes or on a tile, you can't put a sensor on a container.

  3. It's not too far to run a pipe. I usually put a chlorine tank somewhere that I pipe it into from the environment, and then you can build a chlorine room close by and pipe it into the room. But if you vacuum a room and drop in a bleach stone, it will fill with chlorine, which is enough to kill germs, even though the pressure is low. The check is only on the atmosphere being chlorine, not a specific pressure of chlorine. Note that a good automated design for killing germs in water requires about three tanks and some piping and and a sensor. A manual design only requires one tank.

  4. Plants are yes/no. You have to fulfill all the needs to get the domesticated yield numbers. They stop growing completely if the requirements aren't met.

  5. Yes, containers matter for the total decor. Diamond aero pots are the best.

  6. Yes, use the auto-harvest tool to select a bunch of plants at the same time.

  7. No, but there are mods that allow you to store blueprints.

  8. Yes, press 'B' with a thing selected.

1
Ethinolicbob•

The heat is a set value and seperated by abysalite. One you break it the heat will normalise over the 2 areas.

Putting a tank in a cold biome in not sure how effective it will work. To detect the temp of the tank make a small loop from the output to input so water can flow.

As for pipes over long distances, why not?

1
irishpete•

Y is the default hotkey for auto harvest.

I want to make a chlorine room.

what is the purpose, to purify water?

1