Splendiks

u/Splendiks


r/Miata•

Paying $600 (shipped) for what boils down to $100 of bent roll cage tubing is a bit ridiculous to me. I've found plenty of roll cage kits and plans, but none for the basic 4 point roll bar the miata needs for track days.

Notching, bending, and welding a roll cage is well within the skillset of my friends and I. But if I can avoid the trial and error engineering of designing a bar that will fit under the hardtop that I do not yet own, that would be excellent. I'd pay a bit of a premium to buy a set of perfectly notched and bent tube, just to save me an afternoon. Installing the cage kit in my buddies BMW was a breeze because all the pieces just fit.

So what's out there?

28

I'm finally building rockets for the first time, and planning out infrastructure. There's a lot of heat that needs to be moved around - creating steam, cooking crude into petrol, chilling oxygen and hydrogen into liquids... Even chilling the launch tube to recapture launch steam.

I could just run aquatuners in the local area, but it seems simpler (and less energy) to 'pipe' in heat from a volcano on the opposite end of the map. Is steam the best way to pump heat around? Is it more efficient to use 300c or 600c steam than say 140c?

Or maybe liquifying aluminum is a better choice?

Or maybe there's just not that much to be gained over using magma to run steam turbines, and then running aqua

10

I'm 500 cycles in, and finally have dedicated personnel for most jobs. I have:

2 digger / builders that should have free reign of the map.

2 operators that should have access to the hot zones, but shouldn't be distracted by exploration.

3 farmer / ranchers that should have access to the main base

A researcher and a cook, both of which have zero reason to ever leave the 'core' base.

Is there a way to control door access without going to every single door, and checking the permissions for every single dupe? When I get a new dupe, I will then have to go through dozens of doors *again to allow them access? Or is I want to change a dupes role?

There must be a way to define ranks? Or zone

10

r/ulmidwest•

I'm furloughed for a few weeks, and there's no way I'm sitting inside. Anyone have any insights into what's open and what's not? Some states say their parks are closed, but really...? No way they'd catch you once you get on trail. Prefer to go south as it's not summer yet, but clearly not the time to be picky.

10

First time on arbor / rust biome, looking to make iron (and bonus O2) with a rust Deoxidizer.

The wiki says the output will be 75c, and that the 'THC will be 1.5x inputs'.

So it seems like I will be wasting cold by feeding 5c rust to the Deoxidizer, but I am confused about the 1.5x THC.

I was thinking that ideally I want to feed it 74.9c rust, as converting it will add only 0.1c. But with the 1.5x factor, does that mean my iron ore will come out at 112.5c? (75x1.5=112.5). If so, then my target should actually be 50c rust? (50x1.5=75)

In short, I'm trying to determine how much heat I can dump into the rust biome to take most advantage of its current chilled state.

Are there any other

12

r/Miata•

My miata is mostly stock - just stickier rubber, swaybars and ebay coilovers (on the car when I got it). 75k mi.

This is a Sunday driver / autocross toy, and I am slowing acquiring the bits I need to be allowed on my local track (roll bar, helmet, seat, 5-point, etc). Someday I would love to do spec miata, but that's a pipe dream at this point. For now, I'm just trying to tighten things up and more importantly fix the 'issues' between the seat and the wheel.

A polyurethane bushing kit came up on my local Craigslist (it's new). Will this improve response/feel? Or is this just a huge pain in the ass to replace stock components that are still pretty good?

14

r/chrome•

I need to visit a specific site frequently for work, and this site automatically begins a download. Is there a way to prevent this specific URL from downloading files?

My work flow is unusual, so I am basically the only person this bothers.

11

Sorry for all the questions! Trying not to clutter things, so I waited and just made one post:

Do ice biomes actively remove heat energy from the world? Or do they start with a significantly lower energy, and eventually rise to equalibrium with the rest of the world? (assuming I punch holes in the abyssalite boundaries to allow transfer).

Can I read the temperature of a gas/liquid tank with an automation sensor? Instead of running a cooling loop, I was thinking of pumping geyser water into a tank in the ice biome, and then a sensor would empty it back into the main base once that tank full had sufficiently cooled. I could make a pit, but just the tank building would be cleaner/easier.

I

29

r/Miata•

I've been searching for a hardtop for a while now, and have accepted that I'm going to jump on a bargain, regardless of color.

Trying to paint it to match my British Racing Green seems like it will be frustrating for someone as cheap and anal as I am, so I'm thinking an accent color is the way to go. Might just wrap it.

Thoughts on a black top? Gunmetal? Carbon fiber pattern? And any pictures of these color combos? I have bronze wheels and a tan interior if that affects your recommendation.

313

r/flashlight•

Obviously as the Dia / length of the reflector / TIR increases, so does the throw. Is this consistent?

If you know the throw of one lens, could you calculate the throw of a scaled up or scaled down version?

Bonus: any suggestions for researching different reflector/TIR shapes and how I might be able to obtain a new or larger optic?

116

r/dumbphones•

I tried a flip phone for a week, and really the only thing I missed was having a decent camera in my pocket.

Which feature phones have the best camera? I prefer a solid, thinner device, but I think a solid camera could push me to something bulkier. Rather spend a few more bucks than have some flimsy plastic thing.

612

r/flashlight•

I have a Wowtac A2S that I am learning with. I reflowed the Cree XP-L and replaced it with a Samsung LH351D. Simple enough.

Now where do I start researching driver choices? Given that this (and most of my lights) are single cell, does that mean I can limit my research to linear drivers? (I shouldn't need boost/buck, right?)

The biggest thing I'd like to change is the single click to turn on... It's much too easy to accidentally hit. I'm thinking long press for moonlight, click to cycle, long click for off, double click for turbo. Runtime is more important to me than raw output. An actual moonlight (not just 'low') is also desired.

I guess I really should just pick one and do it... Easy

1610

r/Miata•

Some day, I'd like to run spec miata or another budget class. I've got some vacation to burn, and was looking for things to do. Racing school would be awesome, but I'm seeing prices of $4-5k for a 3 or 4 day class. That's about a fair price for use of a performance vehicle, track time, and instructor time, but a lot of money none the less... For the same $5k I could get my NB track ready (cage, nomex suit, etc) and get a lot more seat time for the same money. Heck, for $5k I could probably find a junk NA and build a Lemons car.

My only racing experience so far is maybe 10 autocross events, and a 15 lap Nascar Driving Experience. Building a car sounds like almost as much fun as driving it.

34

r/flashlight•

Illumn’s sale got the best of me – two new lights on the way (Lumintop Micro GT and Tool AA 2.0), and no batteries to run them. I don’t need anything crazy - I won’t notice a few more lumens, but longer runtime is appreciated. For simplicities sake I’d prefer to run the same cell in both lights (plan is to buy 3 so I can have one charged), but if it makes sense to buy different cells for the lights I could be convinced.

Will be charging with an Xtar VC2 charger, if that impacts my choices.

49

r/flashlight•

A 4 pack of Eneloop Pro's are sitting in my shopping cart. Was just going to grab the Panasonic charger, but I noticed there were several, so I started researching only to realize there was dozens of options.

I only have a few lights - a couple 18650 cells get charged on a two cell Xtar charger (USB input, digital readouts), and that works great.

I now have 2 single AAA lights I've been using with primaries, and zero AA lights (but safe to assume that will change). I don't envision using Eneloop for anything but flashlights... I think my TV remote might be the only other thing to accept AA/AAAs, so I probably don't need a big charger.

I'd prefer USB input over mains so I can charge in th

612