Sour Gas Boiler (pre-space materials, 1.5kg/s sour gas out, updated build)
This is the third post in an effort to make a pre-space sour gas boiler system. The previous post is here where I go into details about a condenser that works well with this boiler. This boiler is an update to the previous boiler in the first post in this series.
Boiler
The largest change is that the gas elevator has been significantly extended and the baffle cooling stage has been significantly reduced. This was based on a realization that the best heat transfer was coming from the heat elevator. This build is only one tile taller than the previous boiler but is significantly better in terms of heat efficiency. The heat efficiency is not yet worked out, but both boilers were running in my test map while I was testing things and the magma heat source was significantly depleted in the old build as compared to the new one after a while.
Two other updates are the inclusion of an a heat sink row in the heat injector and an input shutoff in the top left. The heat sink row helps even out the injection heat which is handy. The input shutoff is something that was brought up in the comments about the previous build. After running my tests with this setup, I heartily recommend the input shutoff.
Other changes are the use of diamond tiles, a switch to turn off the pumps just off the top of the screen, and the turbine combined with the total structure. Diamond tiles are fine, but mostly seem useful in reducing steel. The switch on the pumps is for testing, but the same automation could be operated by the gas intake shutoff mentioned in connection with the condenser. The turbine integration was always intended, but was separate in the previous version to focus on one thing at a time.
Boiler Piping
Power and Automation
Everything else is very simply connected and similar to previous. The automation settings are "Above 555C" on the Thermo Sensors and "Above 1200g" on the Atmo sensor. The valves from left to right are 1500g/s, 1000g/s, and 500g/s. These valves peal off 500g/s for each elevator. The upper chamber where the Atmo Sensor is located average between 800g and 1000g per tile, so the sensor swiftly shuts off the input whenever the output is blocked for any reason. This lets the condenser stage (or a switch) simply turn off the pumps for a safe pause in the processing.
Conclusion
This is an updated build that I've been using for much of my testing of the condenser because it was just superior to the previous build. I figured I should share it for those following along. I'm planning on moving on to an open design based on previous suggestions. The elevators in this and the previous design are as wide as they are to conform to the use of gas pumps and allow gas to spread out easily, this will not be necessary in a build where gas simply flows out the top and into a condenser, so I'll see if I can consolidate the elevators while I'm at it.
Posted Mar 4, 2020, 3:01 AM UTC
What is a sour gas boiler for?
It comes down to how you turn oil into power. Oil can be boiled to petroleum or sour gas at 1:1. Sour gas can be condensed to methane at 3:2 and methane boils to natural gas at 1:1. This means that 1kg of oil can be either 1kg of petroleum or 0.6667kg of natural gas. The petroleum generator produces 1kW/kg while the natural gas generator produces 8.889kW/kg which means that the same amount of oil produces 5.926 times more power of made into natural gas than if made into petroleum.
So far, sour gas boilers have been a thing that has mostly been brute forced with space materials. This is an effort at a clearer approach that can be made without such materials and could improve efficiencies.
This is only half of the total build. Sour gas condensers are independently useful because they can be used to make use out of sour gas found around the map. Because of that, it makes sense to consider things separately... At least at first.
Thanks a ton. I had no idea sour gas could be processed to methane then NG. This game and it's players never cease to amaze.
I do have a ton of sour gas all over the place... I've also got more power than I know what to do with though. I ended up with 5 NG geysers and 6 hamster wheel slaves, I'm basically done with everything pre-space and I haven't had to use any non-renewable geyser power at all.
A petroleum boil, which produces half as much power by using something hot (usually magma) to change crude to petrol at a 1:1 ratio is usually sufficient for power needs.
For reference, the machine crude boiler building is 2:1 crude in to petrol out.