Brake Cleaner Alternatives
So, I'm about to do my brakes for the first time, and the only thing that I'm missing is brake cleaner. Unfortunately, with quarantine all around, getting it from a shop is problematic. I do, however, have a can of MAF cleaner and a can of throttle body cleaner. Looking up those combined with brake cleaner brings up tons of questions asking whether you can use brake cleaner spray on MAF/throttle body, but I'm wondering the opposite: is it OK to apply one of those to brake lines, calipers, etc. - essentially, all the parts that should be cleaned when replacing the pads?
Thanks ahead!
Posted Apr 7, 2020, 9:53 AM UTC
depending on the brake system..
you can do it without brake cleaner. i used hot soapy water for decades to clean my discs and rotors. caliper external surfaces.. backing plates and various parts..
if you run into coatings that are tough. like some rotors are coated with.. try your other cleaners.
the biggest idea.. don't get grease or grime on the pad surfaces or rotor/drum facings when assembling.
some parts stores still deliver, there are also depending on where on the planet you are.. are delivery drivers that will pick up orders for you and drop them off..
i should also say that i have seen people assemble brakes with hands covered in grime.. and the brakes worked..
Thanks! It's a 3rd generation Miata. I'm mostly worried about damaging the brake lines and rubber grommets, etc. I suppose soapy water shouldn't cause any trouble.