Temp of rust to feed Rust Deoxidizer?

First time on arbor / rust biome, looking to make iron (and bonus O2) with a rust Deoxidizer.

The wiki says the output will be 75c, and that the 'THC will be 1.5x inputs'.

So it seems like I will be wasting cold by feeding 5c rust to the Deoxidizer, but I am confused about the 1.5x THC.

I was thinking that ideally I want to feed it 74.9c rust, as converting it will add only 0.1c. But with the 1.5x factor, does that mean my iron ore will come out at 112.5c? (75x1.5=112.5). If so, then my target should actually be 50c rust? (50x1.5=75)

In short, I'm trying to determine how much heat I can dump into the rust biome to take most advantage of its current chilled state.

Are there any other processes that can be thermally optimized by feeding ingredients at a specific temp?

Posted Apr 28, 2020, 5:50 PM UTC

12
aznboy84•

It's the heat capacity, not the temperature ... it's said 1.5 THC because Oxygen has more heat capacity over Rust.

The O2 output are at 75C or more if the average temperature of Rust + Salt are greater than 75C, even if you fed -273C Rust and Salt if will still output 75C Oxygen which is ridiculous :)

Edit : Use Electrolyzer instead, once you get enough steel build a Rust Melter to convert 100% Rust into Iron :)

3
Heremeus•

THC is the heat capacity. If you feed 75 degree rust and salt, you will get 75 degree iron, chlorine and o2. But if you want to heat/cool the output it will take 1.5x as much energy per degree compared to the input.

For example, let's say you use an aquatuner cooling loop to move the heat from the output to the input. If your input is at 15 degrees, you can dump 60 degrees of heat into it before feeding it to the deoxidiser. But because your output needs 1.5x as much energy to heat/cool, you only cool the output by 60/1.5=40 degrees to 35 degree.

That's assuming you heat/cool the whole input/output. You might not care about cooling the chlorine and iron.

2