Best method for moving (and storing) high heat level around base?

I'm finally building rockets for the first time, and planning out infrastructure. There's a lot of heat that needs to be moved around - creating steam, cooking crude into petrol, chilling oxygen and hydrogen into liquids... Even chilling the launch tube to recapture launch steam.

I could just run aquatuners in the local area, but it seems simpler (and less energy) to 'pipe' in heat from a volcano on the opposite end of the map. Is steam the best way to pump heat around? Is it more efficient to use 300c or 600c steam than say 140c?

Or maybe liquifying aluminum is a better choice?

Or maybe there's just not that much to be gained over using magma to run steam turbines, and then running aquatuners from that electricity? Though I do not believe that will get hot enough to cook petrol (there's 2 oil wells conveniently next to my launch pad).

What about storing heat above 100c? Liquid metal / salt? Or run a steam turbine, store electricity, and power aquatuner/glass forge as needed?

On the cold side of things, supercoolant is the obvious choice, once I get the materials. Is polluted water my best bet until then? Meaning I cannot make liquid oxygen until I aquire fullerene? Aquatuner is the only reliable method to make the crazy low temps, right?

Posted Apr 30, 2020, 6:22 PM UTC

10
FuzzyBacon•

To answer your last question, you can make LOX using hydrogen gas run through thermo regulators, but it's slow and inefficient compared to supercoolant. And you can use ethanol or petroleum as coolants to get it a good chunk of the way there.

The issue I'd see with trying to move heat around your base directly is that without something like insulation that won't leak heat, you're going to end up with broken pipes and a general disaster pretty much no matter what you do. And if you've for enough insulation to run insulated pipes of insulation around your entire pipe, you've clearly already won the game.

3
SplendiksOP•

I didn't even realize they're was a material called 'insulation' until now! I was just planning to use insulated pipes made of obsidian or whatever. I see now there's still 3%+ heat transfer, which probably really adds up with contents at a few hundred or more.. So I guess that kills that idea.

3
Sinthetick•

Keep in mind insulation is VERY expensive. It requires reed fiber and space materials, so even then you aren't going to be able to just move huge amounts of heat with out cooking everything in between. Just deal with it locally.

3
r4d6d117•

Insulation is Space stuff. Pretty end-game and costly to make.

2
Quaffiget•

You're kind of all over the place.

Why do you specifically want heat from a volcano to be where your rockets are (or wherever else)? Just convert the heat on-site at the volcano into whatever you want.

It's pretty self defeating to move heat over to the rockets to cook petroleum (for example) when you can just do it at the volcano and then build a separate facility to do the same but with recapturing exhaust heat.

The end product is the same: Petroleum. (Or steam power. Smelting ores. Whatever doodad you're aiming for.) Either way you're efficiently making use of both heat sources.

You "store" heat by converting it to usable product (e.g. metals, sour gas, power or petroleum) or trapping it inside of a steam turbine chamber. That's all. You don't have to move it anywhere.

For steam turbines specifically, a well-insulated chamber with hot steam in it can be drawn upon anytime by automated turbines. Moving the heat around is more likely to cause you to lose the heat rather than just leaving the steam where it is. Though most of the time you don't have enough heat trapped to justify not having it on 24/7.

3
StevoJ89•

Maybe he's at that point in the game where he's just pumping liquid steel for shits 'n giggles?

1
TheHoley0ne•

You can move high level heat and cool (cold?) throughout a base using vacuumed out areas with no losses. Cross them with transit tubes when needed, or use the insulation material for a couple of the pipe pieces where the dupes need to cross.

Gases have poor thermal capacity, imo petrol/supercoolant is good for medium heat levels, molten aluminium for hot stuff (like petrol boiler) and then liquid carbon for shits and giggles...

In theory you can also use solids for heat transfer too, though I haven't done that.

1
irishpete•

I saw a base living video piping liquid magma around but unless u are a Jedi master of oni I wouldn’t try it

1
Hypatiaxelto•

In my opinion, the easiest way to move low level heat (<500K) is with an aquatuner+turbine at the hot end, and an aquatuner at the end you want to heat up. Electricity is nice and easy. If you're after temperatures that will overheat an AT, you need to get more creative.

The steam for rockets is dead easy - get some water in a drywalled box with some gold amalgam gas pumps, pour water in, and run a convener carrying regolith through it. There's an infinite supply of the damn stuff for free heating.

Cooking petrol, I wouldn't bother insisting it has to be done on site. I'd just set up a volcano boiler somewhere that is practical to build one and run long pipes.

Petroleum rockets should last until you get Super Coolant. Which is the only sane way to get Liquid Hydrogen. You can dribble pre-chilled H2 through Thermoregulators if you're a masochist though.

1