I'm a noob, took me a month to figure out my problem was a loose extruder nozzle.

Discussion

I bought a Kingroon to get started. I leveled the bed, printed some stuff. The quality wasn't perfect, I figured that's what you get for the price. Google said to adjust settings, they didn't help at all. The globbing and stringing got worse and worse until I was supervising and wiping excess off the side of the head every twenty minutes to prevent another glob.

I finally realized that the hot excess PLA goo was forming on the side of the head, so I realized that it must be leaking. I removed the cover, and while it was hot I tightened the nozzle with two wrenches. It was finger loose before, I can show you the blister on my thumb from where I grabbed it because my dumb ass forgot it was at 185 degrees.

After I have tightened it, my printer now prints pristine, with no blemishes! I wish I had figured this out a month ago!

Just thought I would share in case it may help another noob.

Posted Jun 25, 2020, 2:55 AM UTC

24
IamTheDarkAgentCR-10S with TH3D V6 Hotend & Cr-10S with Chimera Dual Hotend•

I laughed at you touching the 185c nozzle but then I’m the dumbass who dropped a 400c soldering iron and caught it giving myself 3rd degree burns on 3 fingers of my primary hand!

3
unfazedpoppy•

I have to verbally tell myself not to touch the hot nozzle

3
Jaytalvapes•

Don't feel bad. Back in my vaping days I had a metal coil glowing white hot and touched it to my lip.

I'm pretty sure my whole town thought I had herpes for a month.

3
TheOriginal_RebelTazTevo Tarantula•

It was finger loose before, I can show you the blister on my thumb from where I grabbed it because my dumb ass forgot it was at 185 degrees.

In the words of Bill Engvall... here's your sign :)

Seriously though, glad you got it figured out.

2