Got a question about the driver side sway bar mount
Seems like the welded in nut or the threads in the unibody (whichever) has failed on one of my sway bar mounts. Now I looked this up before starting and kept reading all I'd need to do is remove the bumper and I'd have access. Well, that's not the case. It seems the steering box has a block in there for support. So I need some ideas.
https://i.imgur.com/B6X1L1a.jpg
Posted Jul 27, 2020, 3:06 AM UTC
24
Pull the bumper and you can get a wrench and a nut in there under the steering brace. Its not easy but you can get it in there. Its an 18mm bolt if i recall
If you have to, use some washers or a shorter bolt to keep it from hitting the bolts from the brace
I did pull the bumper. In the last picture that hole isn't for the sway bar mount, it's just a random hole. The bolt and subsequent not is behind that support thing.
If you have an XJ in a junkyard near you, you could pull the bolt and flagnut from the tracbar. Notch the hole for it oblong to where you could feed it in the unibody and put the flagnut inside it. You'll have to get some dexterity going but itll work. I used one on mine for the forward hole