13.325" rail too long for a 13.9" build?

Hey y'all, quick question for those of y'all a little more experienced than I.

I'm working on building a 13.9" hypebeast carbine like most folks here it seems, but I'm running into a snag with rail selection. Would a 13.325" Midwest Combat Rail clear a Dead Air Flash Hider on a 13.9" barrel (Criterion Core) without having fitment issues down the road when my poor ass can afford a can? (DA is open source AF, so this is relatively future proof, short of powered rails or a new mutant form of dickmod becoming popular again.) I'm pretty much set apart from the rail and BCG at this point, so... just trying to shore up the build list before waiting for all eternity for parts to come in the mail and/or in stock.

Thanks.

Posted Jan 11, 2021, 2:48 AM UTC

313
b_owens971•

I have a criterion 13.9 with a Geissele mk8 13” rail, there’s about .25” between the end of my rail and my Sandman S. I wouldn’t try it personally, I can’t foresee it working.

3
Practical_ProleOP•

Gotcha. MCMR-13 a decent alternative in that case? Trying to keep it svelte as possible.

1
b_owens971•

That’s what I really wanted, best of luck finding one in stock unfortunately. I ended up running across this Geissele locally and jumped on it. 13” seems to be perfect.

4
xCharmCity•

The MCMR 13 is really 13.4". You want around .62" less than the barrel length (length of the threads) so the MCMR 13 may still be too long

2
StoopingRaptor•

I’d just go with something a little shorter. Most of not all light mounts push the light further forward than the front of the rail so you can afford to shrink it up a bit.

2
DakottleFinancially Irresponsible•

Generally there’s 0.6” of threads. With shims and the base of the muzzle device you will be cutting it close but could make it work with multiple shims for an extra rotation. I think it’s silencerco that makes a 0.25” shim for this exact reason.

If you’re set on the rail it could work but if you change your mind on the type of suppressor/mount it could cause issues. YHM QD mounts for example add a fair amount of length while SureFire muzzle brakes basically have the suppressor just at the first shim behind the muzzle device.

If you’re not chasing as small of a gap as possible go 13”. SLR makes 13.1” handguards if you want something to look at.

2
mnmlmmml•

Check out the SLR Ion Lite 13.1 - it's specifically for 13.9" barrels. I have one, it's a great rail. Still waiting on the Triarc barrel so no pics to share unfortunately.

2
eastlakebikerider•

Yup. Doesn't fit without modification.

2
Agentfish36•

Probably too long. You have more than 1/2 inch of threads usually.

1
DerpityDerp45•

I feel like a 13.5 handgaurd could be the ideal length for u. I run a 13.7 but 13.5 is a quarter inch too long for me

1
PlatinumCore_16•

Hot take: you could just cut it when you get to that point 🤷

1
eastlakebikerider•

My 13.7 BA with KAC spacer and DA keymo FH on 13.5" MK4 rail. Haven't tried fitting a can yet, but think it's gonna fit. https://imgur.com/a/nMM6QEg if it doesn't fit, nothing a kiss with a belt sander won't fix.

1
slashlard•

Have you had a chance to stick a can on?

1