ALR5 Bottle cage under downtube?

What's the right way to mount a bottle cage under the downtub? I got a Widefoot Litrecage to mount down there and I noticed that the cables for the derailleurs and rear brake are thicker than the riser bit on the mounting holes, so you can't really bolt it in all the way. Am I supposed to use an additional riser to avoid pinching the cables?

Posted Apr 1, 2021, 8:39 PM UTC

35
Joinerordie•

I use a couple bushings to push away from the down tube.

2
dmgpunk•

I hope you get an answer, I’m curious about this too.

1
503evan•

Yeah that’s what I’ve done, you can use old adjustment spacers from V-brakes or just get some dedicated spacers. Anything to get it a bit further away from the frame

1
freddzooor•

I’m using two nuts, both one millimeter bigger than the bolt that holds the cage. They just works as a spacer

1
JealousAdeptness•

A little late to the party but I used two old presta valve nuts. If you don’t have any sitting around any shop should give them to you for free. Just keep in mind that gravity is working very hard against your bottle in the bottom cage and it will likely come out of you don’t use some kind of strap to hold it in

1