one of my neighbors is selling his 06 LX with 209k miles for $2.1k but says that sometimes the car fails to switch out of N to D. how big of a red flag is that? i don't have a lot of experience working on cars but i'm comfortable to do things like change the shift solenoid. what should i look for to see if that's an easy fix or a whole transmission problem.
Pewpasaurus
u/Pewpasaurus
i finally finished my kensho 2 back in january after piddling my way through it over the course of 3 years. all the individual pieces went fine but i absolutely fucked up attaching the mesh to the ceiling/door assembly and practically ruined the tent. in retrospect, adding the mesh to the roof/door panels then joining them to the floor as the final step would have allowed a lot more room for error. if i wanted to fix this, i'd probably need to remake the the entire roof/door assembly, right? i'm too close to this travesty and can't decide what to do with it.
I thought had 2 failed flex cable installs for my pluto ii and soldered in an ezpluto board this weekend. HDMI works but only if the av cables are plugged in (and also into a tv). Does anyone have any idea on why this happens? I have read about the power board being being odd with video mode switching and did order a replacement one, but that feels like throwing darts in the dark.
I just bought a cheap 20b Bastari to learn some music. I don't have any musical background, so I'm starting from the absolute bottom. I noticed that the Anglo layout has two A/G keys on the left hand. Why is that?
I finally finished my chonky sling a couple weeks ago and finally got to take it out, but it appears that my webbing tore out of my seam. What causes this? Did I not get the webbing into the seam far enough? Was the end not melted enough?
What's the right way to mount a bottle cage under the downtub? I got a Widefoot Litrecage to mount down there and I noticed that the cables for the derailleurs and rear brake are thicker than the riser bit on the mounting holes, so you can't really bolt it in all the way. Am I supposed to use an additional riser to avoid pinching the cables?
So I finally sprung for a Daovua Bunka from CKTG. I'm newish to sharpening my knives, so I thought it would be a good knife to futz around with while I practiced. I was aware of the rep of these knives, but still decided to roll-the-dice and order one.
For the most part, the grind and edge were as bad as people say, but that doesn't actually bother me as I'm going to be using it for sharpening practice anyways. What I'm not happy with is the steel's overall condition. To begin with, it looks like it's coming out of the handle in a way which it's not plumb or straight. On top of that, the blade is warped (bowed?)
After a long bit of troubleshooting with Nest support, I set up my 2 zone home with two thermostats and wired the dampers into the * slot. I think this is working (one of my dampers has been broken since before the install, though), but the thermostats ask me what equipment is wired into * and dampers isn't an option. What should I put as that or am I wired up wrong?
Edit: Wiring/settings
I've been trying to grow peppers, but I've been running into a problem where they're all coming out really small(soda can for scale). What I've picked today, clockwise from the can, are cubanelles, jalapenos, and bell peppers. My first 3 cubanelles were picked back in march and were all 7"+, but since then, the plant has been struggling to produce fruit over ~3". These plants are all grown in containers and were transplanted with worm castings & 5-5-5 fertilizer and I've been trying to feed the plants every 3-4 weeks with this stuff, but it hasn't seem
My dad gave me a Bass Pro Bionic baitcaster a few years ago and the handle knobs are just peeling apart. Does anyone know of where to source some good paddle-style knobs, preferably in cork? I spent some time this morning looking and it seems like most places just sell the whole handle assembly, but I only need the knobs.
I have almost 300k locations that I need a to get a distance matrix for. I've tested sf::st_distance() and it worked wonderfully for a sample set, but to do my full set, R wants almost 600gb of memory. renting an Amazon EC2 server looks like it's cheap enough to justify just doing that to complete the matrix, but is there a better way to do this? Alternatively, are there any challenges to using an ec2 server to accomplish this?
After hearing about how great prusament is and waiting months for it to pop back on Amazon, I finally got some last week. However, it has been an utter pain in the ass to print with. I used to get really good bows on benchy with Esun PLA+ and Hatchbox PLA, but now, if the print even finishes without jamming, I get really bad bows. I've tried every 5 degree temp range between 185 and 220 and have not had a benchy come out nearly as good as Esun PLA+. I read that prusament has a bigger issue with heat creep, so I doubled my printing speed @ 220 and started to get a nicer result, but the print jammed when it got to the pi
So I'm going into my second year of gardening (zone 9b) and am trying to assess my successes/failures from the last year. I've mainly got an earthbox with beefsteak and cherry tomato plant in it as well as two 5 gallon self-watering home depot buckets for my bell and jalapeno peppers. All of these plants are a year old now and they're all in kinda sad shape, but for different reasons, and I'm wondering if I can get more expert opinions on them.
I'm pretty sure the tomato plants are pretty severely blighted by now. I've cut back a lot of dead vines/leaves and have been trying to spray them with hydrogen peroxide solut