Replaced capacitor and fan motor on condenser. Fan motor now overheats and shuts off.

Edit: turns out to have been a bad motor. Replaced motor has been running a while and is not getting hot. Thank you all for the advice!

Hello,

I have a Bryant unit from 2002, and the capacitor and fan motor went the other night. I replaced the (bulging) capacitor and the fan motor. All connections are in their proper place on the capacitor (fan to fan, compressor to herm).. the unit starts right up and cools appropriately. Then the fan motor shuts down and the compressor keeps running. I turn the breaker off to the condenser. After a while I can turn it back on and repeat until the fan heats up again.. any ideas?

Capacitor specs match exactly

Fan motor specs match exactly.. its pretty much the same fan motor as what I had, got it directly from grainger yesterday. Everything on the sticker matches, including rotation direction.

Blades were taken off of old motor and re installed on new motor.

Any help would be appreciated!

Posted Jul 9, 2021, 3:54 PM UTC · edited

223
Loading comments…