Utilizing the gpu backplate for passive cooling of the vram?

Question

Hi all,

Quick question here. I just upgraded to a 3080ti from 1080ti. The temps of the gddr6x are a huge discussion point. I am currently using a bykski block and the stock pads that came with it. When gaming, I am reaching memory junction temps of 85C - which is higher than what I was seeing with the air cooler!

I thought to myself, okay I have this big metal backplate that could act as a passive cooler to the vram maybe?? I put some of the extra pads on the back side of the card around the vram and power controllers. I saw maybe a 2C difference in testing. My concern is that this backplate will become heatsoaked and actually cause higher temps in long gaming sessions. Are my concerns valid? Should I remove the backplate pads and let the block do all of the work?

Additionally, I have purchased 2.0mm Thermalright extreme odyssey pads to swap out this weekend with the hopes to lower the vram temps a bit. I read that 2.0mm work best with these cards and not the 1.8mm they give you.

Thanks for your time, I am looking forward to your responses.

Posted Jul 23, 2021, 4:35 AM UTC

419
titanrig•

With good contact (your thermal pads), the heat will always move faster through the backplate than without it. Don't worry about heat saturation - aluminum transfers heat VERY well, both from the VRAM and to the surrounding air. Decent air flow across the backplate is all you need.

3
NovercaOP•

Awesome! I'll be sure to have one of my fans pushing air across it.

1
Gurkenkoenighd•

I will Never run hotter with thermalpads on the backplate than without them. Unless you attach a heating plate ofcourse.

2
NovercaOP•

Yeah that makes sense. I suppose that I was concerned about the heat linger longer, causing the vram to be warmer for longer after a gaming session. Kind of like how using a larger res in the loop will hold the heat longer after use.

1
masat•

The backplate is supposed to be used as a passive cooler. On the bykski link you provided there's mounting instructions that show that you are supposed to put thermal pads under the backplate.

Or do you mean the outer surface by "back side"? I recently saw this post where someone just threw a heatsink and fan on the backplate, that might help.

2
NovercaOP•

I did not mean the outer surface, but that is a really cool idea!

I figured the instructions about the pad on the back side were for the 3090, when not using the active cooler. But I suppose that would make sense for the 3080/ti as well to pull heat from vram.

2
BadInfluenceAF•

Sorry to revive an old threat OP, but I have a question. Did the 2mm pads help with your mem temps? I’m using this block on my Gigabyte 3080, and my mem temps reach 96c. I reassembled it once already, and the thermal pads seem to be making good contact, so either my block is a dud or the thermal pads are bad. Any help/tip will be really appreciated.

2
NovercaOP•

Extreme odyssey 2mm were too thick / wouldn’t compress enough to allow block contact with the gpu due. Was too impatient to wait for something else and just went with the provided pads. During gaming memory junction stays below 85c so I’m okay with it. Might switch it up for something else next time my loop is drained

2
BadInfluenceAF•

Hmm I’ve been debating whether to get the Gelid Extreme 2mm or 1.5mm. I heard the Gelid ones were really compressible, but I cant afford to gamble on the size, so here I am trying to get opinions. I’m honestly having buyers remorse right now lol

2
NovercaOP•

Have prime? Buy on Amazon and if they don’t work just return.

2
BadInfluenceAF•

Im not sure they’ll appreciate me returning cut up thermal pads

2