
Noverca
u/Noverca

61761 is local
| Item | Price | Condition | Timestamp |
|---|---|---|---|
| MSI 1080ti EK Waterblock | $50 local / $65 shipped | Like New | https://imgur.com/4RpDPcy https://imgur.com/YUzbJIt |
| Reference 780ti EK Waterblock and backplate | $30 Local / $45 shipped | Good, removed from old system about 2 years ago | https://imgur.com/WEPR5OZ https://imgur.com/H46vAWQ |
| (2) 6ft CableMod DisplayPort 1.2 Cables, 45 degree input on one end | Free local / $7 shipped each | New In Packaging | https://imgur.com/Gamerp4 |
| PCIe 3.0 Riser, came with cablemod vertical gpu mount but I went with a 4.0 riser | $5 local / $12 shipped | Mint | https://imgur.com/yRFqZBo |
| Motorola SURFboard 200 Series, stop renting from |
Hi all,
Quick question here. I just upgraded to a 3080ti from 1080ti. The temps of the gddr6x are a huge discussion point. I am currently using a bykski block and the stock pads that came with it. When gaming, I am reaching memory junction temps of 85C - which is higher than what I was seeing with the air cooler!
I thought to myself, okay I have this big metal backplate that could act as a passive cooler to the vram maybe?? I put some of the extra pads on the back side of the card around the vram and power controllers. I saw maybe
Local to 61761
MSI 1080ti with EKWB and original air cooler: $500 Shipped. $480 Local
Got lucky and recently upgraded to 3080ti.
I am the second owner, it has been on water for the 2 years I have used it, loop flushed every 6mo. Pulled from a working system and flushed with distilled water. Will include original air cooler.
Post then PM.
Local to 61761
MSI 1080ti with EKWB and original air cooler: $600 Shipped.
I am the second owner, it has been on water for the 2 years I have used it, loop flushed every 6mo. Pulled from a working system and flushed with distilled water. Will include original air cooler.
Mobo + CPU + RAM: $80 Shipped Sold to u/UNCfan07 for asking price
This combo has served me well, was able to take the cpu to 5+ghz on water.
780ti with EKWB and Backplate: $75 Shipped Sold to u/UNCfan07 for asking price
This has been sitting in storage for nearly 2 years. Pulled from a working system at the time. Does not include air cooler.
Please comment then PM
I've had two 780ti in SLI for nearly 4 years. The other day one of my blocks leaked and fluid ended up on the backside of the other card. Performance dropped in the game I was playing was the only reason I noticed.
I have removed the waterblock and cleaned the card. Once reinstalled into the system the card is hitting the power limit built in by Nvidia (130%) at all times and will not increase clock or voltage. There is no visual signs of a short or damaged component anywhere on the card, but I do believe that some component on the card is damaged and causing the power issue. I've tried looking up PCB breakdown videos on the card to pinpoint the power delivery components but
Trying to remove a bent shaft out of the Emax rs2205 red bottom motor. The shaft wont budge out of the bell. Do I need to apply heat? Do they have lock tight in there? Any tips?
tried following this video but its not going as easy as in the video.
Got out for my first few FPV flights today. I am using lumenier 1300 LIHV packs.
Used about 850ish mAh according to the OSD and the voltage when I landed was around 14.8.
Got home and hooked them up to my charger (skyrc d100) and checked voltage. One pack was at 3.81 on all cells and the other 3.80. When I started the storage charge, it said the fuel was only at 10%?
Did I over discharge? Could I have gotten more flight time (was at about 4:30 not aggressive flying) Is voltage more important than this fuel % the charger is giving me?
Also, starting a spreadsheet to keep track of battery data. What else should I log other than the cycles? Very new to this. Thanks in advance!
Right now I have the hubosd and rrosd pro v2 pdb/osd. I'm trying to decide on which to use in my first build. Should I use the cheaper one with known issues because it's my first build and I'm bound to break it? Or go with the higher quality part for quality of life while flying?
Thanks!
Other Help:
-What is your level of experience building RC multirotors? Pick one: Beginner
-List of all components: qx95 kit from bang good (flysky)
-Describe the problem in detail: Broke arm on frame
-Optional Questions: I've repaired it somewhat, but need to replace it with something. Should I just replace it with another qx95 frame or is there any other options that might be better/stronger, given that I only have brushless parts that came with the qx95 as a limitation as well.
Thanks for reading!
I'm living in a small apartment and started to hear a weird noise from my bathroom while at my computer this evening. I go to check it out and the room is filled with steam, nearly quarter inch of water all over the room, and hot water is spewing out of the top of my heater (landlord put the heater in closet of apartment, idk..). Cleaned it up to the best of my ability and took to the internet to figure out what was the problem.. Concluded that the TPR valve discharged as it was designed to do.
My question is, is it safe to run the heater again after a discharge without replacing the valve? It's late and my landlord wont answer, and I would really love a shower before work tomorrow.. I sup
I teach an Intro to Web Design course at a small high school and we are finished with a pre-packaged curriculum a bit early this semester and I have 2 more week until finals.
I want to take them through responsive web design basics during this time and was leaning toward bootstrap until I stumbled upon w3.css! W3schools says that W3.CSS is easier to use, but is that just them trying to sell it?
Again, only have 2 weeks so not much ground can be covered; would sticking with Bootstrap be more beneficial for students?

