Help - Sony 3D 24" Display Not Functioning Properly

Make: Sony

Model: CECH-ZED1U

Attached to: Computer VIA Mini-HDMI Cable

Issue: My 3D display has been working fine as my primary monitor for about a month (Purchased at Christmas.) So I come home from work today and find that when I turn on my monitor, instead of it booting up like normal and showing me what display it is set to, the power light turns green, and then flashes red repeatedly. I tried connecting it to another device like my PS3, and the same issue came up. I disconnected it from everything entirely, and the same issue came up. Anybody have any suggestions or solutions that I just overlooked?

Posted Feb 4, 2012, 7:12 AM UTC

14
dsac•

it's less than 2 months old, it's still under warranty, call sony and get them to replace it.

1
ToukunOP•

I probably will end up doing this, but its a real hassle for me to have to ship it off.

1
floatnspace•

Are you sure that's the model number? I'm not finding very much information about the display you provided.

How to Locate Your Model Number

If I you can locate a manual for the display, you should look up what the red flashes indicate.

Another thing to try is use a different input if there is one (DVI, VGA) and see if the display works. You could have a faulty HDMI cable.

1
ToukunOP•

Actually thats the problem. I couldn't find anything myself, so I came here. On the back of the Unit it says "MODEL NO. CECH-ZED1U" There is no mention of a flashing red light in any of the manual that came with my unit. The model number on the Manual and the Unit match.

I already have isolated the problem to the unit itself. My cord works fine on other hdmi accepting monitors, and my Unit doesn't even accept any sort of input except for power. I've tried different hdmi cables to connect it to different machines, and the problem remains.

The problem remains that it refuses to accept any input, be it from a cable or the buttons on the Unit itself, save for the power switch. It just doesn't activate itself after its "boots" itself, for lack of a better term to describe the delay between pressing the power button and receiving any output from the device. The screen does not activate anymore no matter if there is anything plugged in or not.

1