ASRock Z690 Extreme Help (Ram not recognized)

I'm working on putting together my PC components and when I am trying my initial boot, I'm seeing the dram LED light on (no blinking). With ram or no ram, I do not see the MB letting get into the bios either.

All the lights are working on the MB and RGB ram sticks as well. Ram definitely feels security in the 2nd and 4th slots. The only other things I have plugged in for now are the nvme HD, case fans, CPU and CPU cooler.

Any ideas? I appreciate the help.

Motherboard: Asrock Extreme Z690

Ram: Corsair Dominator Platinum RGB 32 GB (2 x 16 GB) DDR4-3600 CL18

Posted Dec 31, 2021, 6:53 PM UTC

18
rocketrunner442OP•

I used PCpartpicker to help with compatibility and didn't get red flags. Looking at the MB's site, I don't see the ram SKU (CMT32GX4M2C3600C18) listed. Could that be the unfortunate mistake?

1
rocketrunner442OP•

Tried the ram in an older PC and it registered there so I don't think that the memory is an issue.

1

I bought same boatd momery is runnig but only on default. No xmp.profile.or else. I am with gskill.ripsaw V 3600 cl14

1
rocketrunner442OP•

I ended up returning mine after microcenter had the same results with their components. I ordered a new one and then had no issues. I was able to turn on xmp profiles and see the 3600 speed in Windows 11

2

what board did u bought?

week ago i was using amd 6800xt red devil, and i was unable to boot vga signal from tha card from pci-e5 slot 1 (msi edge z690,msi pro p z690).

Than i sold mine amd and bought nvidia 3080 now i am booting but returned both msi boards and bought asrock pro. Because i am using their board and i am very satisfied?

and now i am booting without proper using of mine ddr 4 stick is ridiculous?

1
rocketrunner442OP•

I got the same board again. The z690 extreme

1
Ok_Pea2688•

I had the same problem on asrock z690, spent hours trying to resolve. Tried 3000 speed stick from another pc and it booted. Changed to xmp profile from auto then replaced with 3600 and it was fine.

1