rocketrunner442

u/rocketrunner442


r/AdvancedRunning•

Race Report: Garmin Olathe Marathon in the Land of Oz

4/24/2026

Stats

  • Distance: Marathon
  • Time: 02:42:17
  • Avg Pace: 06:07/mi
  • Elevation Gain: 1980 ft
  • Average HR: 169 bpm

Training Block

With doing 2 majors last year, and Chicago going really poorly, I dedicated this year to being my "casual" year of marathon running. I didn't do any doubles for this training block and cut back to a single workout on Wednesdays (with the exception of an occasional Saturday long run/workout). Overall, I wanted to take a step back with the stress of trying to do it with a job and family and focus on just having a bit more fun. I was pretty much hitting 70mpw with this training and usually doing

50

r/AdvancedRunning•

Mods - I apologize if this is not allowed, please remove if so. There is no cost to any of this so not sure if it breaks the rules.

I'm a long time developer and even a longer time runner. I've been sitting on a domain for a while and finally decided to make a side project to allow runners to aggregate their race reviews in one place. I did this initially so 1) I didn't have to keep filtering my Garmin/Strava to find my historic races and 2) I wanted to more easily compare some of my races and potentially get some feedback.

This resulted in me building out https://www.letsrunfaster.com/. All you need to do is download your GPX file, and the rest of the dat

00

r/truenas•

I'm running into issues trying to get a Windows 10 dell workstation connected to my Dell R520 TrueNas server and I was wondering if I can get some help. I bought 2 IBM Emulex 0CE11102 10GB Ethernet Port Adapter cards an installed them into each, the goal is to be able to transfer files (SMB) via the 10Gbps connection between the machines. I was able to get the interfaces up on both machines, but I am unable to get any traffic or able to ping each other. Am I missing a system confirmation on one of the sides?

Windows machine

IP: 172.17.12.10/24 (No default gateway)

This machine still has its 1GB connection as well set to the 192.168.1.X

Truenas

IP: [172.17.12.

114

r/chia•

Its been about 6 months since I've added any more hard drives to my farm, but found a good deal on a 14TB so picked up and and started plotting again. I've built a new machine for personal use since then and put in one of the old nvme Inland drives I had from the first pass. Its a 1TB Inland drive and the rest of the PC has 32GB of DDR4 ram at 3600 Mhz and i7-12700K. Unfortunately, I'm getting bad plot times with madmax and it looks like its because my nvme are just not staying constant with their write speeds. Is that the case or am I missing something? Thanks. Using -r 18, -v 256 and -u 128, windows 11

342

r/EtherMining•

I'm on a windows 11 machine with a single EVGA 3080TI FTW3 Ultra card. I'm using T-rex 0.24.8 and starting to getting the error "Can't find nonce with device [ID=0, GPU #0], cuda exception: CUDA_ERROR_ILLEGAL_ADDRESS, try to reduce overclock to stabilize GPU state.

I've been moving down my OC settings and I still saw this error wit CC 1100 and MC 1175 PL 83 (locked via T-rex command line).

I previously had this card in a hiveOS rig running at 1250 / 2400 settings with no issue.

Driver Version 496.49.

I'm going to keep trying to reducing the clocks, but these already seem to be well below the norm. Any suggestions

Thanks

19

r/buildapc•

I'm working on putting together my PC components and when I am trying my initial boot, I'm seeing the dram LED light on (no blinking). With ram or no ram, I do not see the MB letting get into the bios either.

All the lights are working on the MB and RGB ram sticks as well. Ram definitely feels security in the 2nd and 4th slots. The only other things I have plugged in for now are the nvme HD, case fans, CPU and CPU cooler.

Any ideas? I appreciate the help.

Motherboard: Asrock Extreme Z690

Ram: Corsair Dominator Platinum RGB 32 GB (2 x 16 GB) DDR4-3600 CL18

18