WLC 9800-L and Aironet 1700

Hi all, I have a 2504 to replace and can see the 3504 is EOS. Looks like the 9800 is the way to go, can anyone help with compatibility with my existing Aironet 1700 series, looks like they are supported but I assume theres a firmware upgrade path with AP bundles involved.

Also on AP license SKU's for the 9800... its been a while (since the 2504's), is it the same deal as before with AP licensing on the WLC?

Posted May 17, 2022, 12:42 PM UTC · edited

216
n00ze•

Your 1700s went "End of SW Maintenance" in April 2020.

9800 does support 1700s, but only until version 17.3.x

Time to upgrade!

3
userunacceptableOP•

Cheers, I had just noticed the last supported was that Amsterdam release, is AirOS on the controller completely gone now so?

This is for a customer, they were penny pinching trying to keep the AP's and I had initially gone in with a full refresh of the WLC and AP's... so at least I have this now to push the push!

2
n00ze•

AireOS WLCs are no longer sold, as of jan 2021.

If they are really penny pinching a refurbed 3504 would be a great choice.

2
lazyjk•

17.3.x is a good AP transition train to get people off the x700 series APs over time while still supporting almost all of the new 91xx APs.

1
userunacceptableOP•

Thanks for the info, are there still dditional AP pack bundles to load for the IOS XE to support the 1700's... just wondering what the upgrade path is going to be like for the 1700's will they just get adopted and upgraded/provisioned ok with the 9800 on 17.3 no matter what firmware the AP's are on?

Is it just an AIR-DNA-E lic per AP?

1
sanmigueelbeer•

9800 does support 1700s, but only until version 17.3.x

Depends on "who you are".

1700/2700/3700 can go all the way up to 17.9 using AP Device Pack.

IW3700 uses exactly the same IOS file for the 2600/3600 & 2700/3700 but IW3700 will be supported all the way up to 17.9.

If you happen to be a very big "whale" and you have a "compelling business case", there is a chance WLBU will provide an APDP.

1
NoorAnomaly•

Keep in mind that the lead time on the 9800s is really long. We ordered in November 2021. Delivery was supposed to be May 9th, and it has now been pushed to August.

2
ExternalUnique•

Feel you. We ordered in October 2021 and estimated dare is pushed back and pushed back. Started with January, then February and now maybe July.

1
smiley6125•

If it an option the virtual version is really cheap ( I think you only pay the support) and use flexconnect if possible.

1
networkgeek•

The 9800 is compatible with the 1700 series up to IOS 17.3. Unfortunately 17.3 is no longer shipping and no longer available for download. Even if you could get your hands on 17.3, Vulnerability and Security support for it ends in Sept 2023. Cisco's guidance would be to upgrade your APs in addition to the controller. That could make this a good time to look at Meraki or elsewhere, if you're interested.

0†
lazyjk•

17.3.x is absolutely still available and is a TAC recommended / long term release. The x700 series are supported throughout the life of the 17.3.x train.

5
networkgeek•

When I checked downloads for the "9800-L" I didn't see 17.3. Checking again I do see it under "9800-L-C" and under "9800-L-F" so you are correct that it is available and starred, but it is also nearing end of security patches per https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-xe-17/ios-xe-17-3-x-eol.html

1
Skywal_id•

As I have access to the 9800-CL trial version I need an AP (the cheapest you could get) which I can use for experimental purposes and is compatible with the WLC. Do you habe a recommendation?

1
lazyjk•

Pick up a used 2702 or 2802 on ebay. Just don't buy a -UXI SKU if you get a 2702. Pain in the ass to prime those.

1
userunacceptableOP•

Cheers, you got a link for that sept 2023 eos?.... just need some backup to support the case for refresh.

1