userunacceptable

u/userunacceptable


r/Cisco•

Hey guys, long time since I had to build a stack wise pair. Have one access pair of 2 x 9300x stacks and one 4x pair.

The 4x pair has now twice lost its stack member provisioning with members losing sight of the active and standby and the active and standby losing sight of each other, though stack cables are correctly connected in the ring.

It leads to the active with highest priority keeping it's config but no others showing as joined in show switch stack...some members coming up the same and all but the active sometimes rebooting into the rommon after 5 reboots (or forced by mode button) and having to get the unset STACK_1_1 and wr erase and set the member I'd as unprovisioned to prov

317

r/paloaltonetworks•

Howdy all, looking for a steer to some good guidance videos/docs on multi WAN load balancing best practices for inside to WAN and outside to DNATs and Palo Services (GP, SAML,loopbacks) when the Palo is the Internet edge with multiple DIA WAN interfaces.

I know VR's are not traditionally for this but I've seen it, and live environment labbed it, being used in some multi wan setups as an LB option on PAN OS.

I haven't, but will, used the PAN OS SDWAN yet - hadn't heard great things about it in the past, but as long as it's stable in simple multiwan SDWAN rules, I would prefer to go this route.

My familiarity is more with Fortigate's when trying to achieve the above and it's straightforward

110

r/ArubaNetworks•

Have a new build with 4 x 6100's, 2 x 24g and 2 x 48g poe. Topology is a ring and a few vlans. All switches in the ring online, can ssh to all of the svi's with IP's, ping DG's from all, STP is fowarding, blocking, alt as expected. Uplinks are 2 x 10Gb lags between switches. On the 2x 24 ports, one being STP root, everything works as expected. On the 2x 48's none of the access ports show link up or speed negotiation on cli show int when a device is connected, logs show me port up and lldp reading the name. Same user device is fine on any of the 24 port 6100's.

On the 2 x 48's with this issue I can place an ip on any vlan and ping, with that IP as the source, to the DG upstream from the roo

316

r/paloaltonetworks•

Hi all, relatively new to Palo but have worked with lots of others. In a HA active passive setup with the Palo at the edge terminating a single WAN circuit. I want to be able to manage the passive PA by DNATing one of the public IP's to an interface excluded from the HA sync, loopback preferably. I cat seem to be able to use the dedicated MGMT interface in policy, how is this usually achieved in a HA A/P?

Can't find a decent kb on it. Thanks

09

r/AskIreland•

Anyone got a recommendation for booking a camper for a short 2 nighter at a festival? Had a look around and most booking sites have 7 night minimums. Pickup would be around South Dublin/Kildare area.

Indiecampers is one I'm looking at but I'd imagine there's some local spots at better rates? Cheers

12

r/ireland•

Camper rental

Entertainment

Anyone got a recommendation for booking a camper for a short 2 nighter at a festival? Had a look around and most booking sites have 7 night minimums. Pickup would be around South Dublin/Kildare area.

Indiecampers is one I'm looking at but I'd imagine there's some local spots at better rates? Cheers

04

r/ArubaNetworks•

Hey all, just looking for honest opinions on experience with the full unified SASE. MSP network architect and use Aruba central for AP and Switching, looking at edgeconnect and SSE as a possible offering. Currently offering Cato, Palo and have lots of experience with Fortinet and some Cisco SDWAN and Secure Connect.

On pricing, SDWAN automation and endpoint SSE/SASE/ZTNA how does it stack up? Thanks!

71

I switched jobs last year and opened a PRB with Davy in order to move my pension funds from my 10yr previous employers scheme. Took a while to get sorted but its done and the PRB is open, funds transfered and is invested.

I now have a lump sum built up over last yr to put into the PRB as an AVC, can I contribute AVC's into the PRB or do I need to open a PRSA also and put my AVC in there?

29

r/fortinet•

Hey guys, is it possible to the use sslvpn on the fortigate nva's when they are inside the azure vwan hub? I know you dont have as much control of the PIPs and DNAT when in the vwan hub but is there a DNAT created for ipsec, management and sslvpn etc on the vwan hub config so you can use these services on the fortigates in the hub from the internet?

25

r/Cisco•

Hey guys, been out of the cisco game for a long while and looking for info on real world throughput numbers for current in life model ISR/ASR. 1Gb is the starting point up to 10Gb. Placement is edge and only need acl,nat and qos. Any perf testing sites or details of underlying hardware (CPU) on models/versions? Can the ISR 1100X handle 1Gb with the extra (?) CPU cores/dynamic allocation for setups with a little ACL,NAT and QoS?... my experience on the ISR1100 so far cap at 500Mb or so with NAT and a few ACLs.Thanks

832

r/ArubaNetworks•

Trying to add a central foundation sub for the first time since the rebrand.. sub enters ok into the greenlake platform but never appears as assignable in the list of subs, have a TAC case open but i'm guessing this might be a common experience since the switch?

210

r/Cisco•

Hi all, I have a 2504 to replace and can see the 3504 is EOS. Looks like the 9800 is the way to go, can anyone help with compatibility with my existing Aironet 1700 series, looks like they are supported but I assume theres a firmware upgrade path with AP bundles involved.

Also on AP license SKU's for the 9800... its been a while (since the 2504's), is it the same deal as before with AP licensing on the WLC?

216

r/ArubaNetworks•

I've a request to use a 64bit wep key for an SSID on an install, the devices connecting are handheld scanners and are apparently limited to wep 😒

I'm around a long time but on central it asks for a 10 char hex and not the ascii passphrase, whats going on there?

116

r/ArubaNetworks•

Hi, hoping someone may have had this before. I have 15 AP's just delivered and I have already registered (serial/mac) and licensed (foundation) on an Aruba Central account, but when I power on these AP's they dont activate with (show up on) Central and are in standalone mode when I access them on the LAN.

I was setting them up from my home lab so they have full internet access/DNS to 8.8.8.8 and are showing the correct time. These are all on the same order for the same customer.

One thing I noticed is that, on all the AP's, "show activate status" shows as:

Activate Status :fail-prov-no-shipped

I have set many of these AP with Central clusters up for various cu

39

r/ArubaNetworks•

I work for an MSP and set ourselves up as a Central account with MSP mode enabled, customers under this account. Just wondering what the process would be like should we need to absorb or transfer a customer from/to another Central account.

We only buy the AP's and mostly foundation licenses.

Has anyone had to do it yet?

34