How Do I Secure a Buddy Seat to the Grab Bar?
I have seen several photos of Ruckuses that have a Schwinn noseless bicycle seat attached to the Ruckus's rear grab bar. For example. I want to do this, but haven't found any detailed instructions or descriptions of the parts required. The best I have found is this post from 2008, but it is not detailed and the photos no longer appear on the page. Can anyone provide more details or a link to full instructions? Part numbers would be especially helpful.
Will attaching a seat to the grab bar prevent me from opening the seat? I have an under-seat storage compartment and need to be able to open the seat. This post shows the Schwinn seat flipped up, but is this secure? I would be concerned about my passenger getting dumped.
Posted Aug 24, 2022, 11:07 PM UTC
Looking at pics of the seat on eBay, there is a mount bolted to the bottom of the seat that’s intended to attach to a bike seat post. Unbolt that and you have a place to bolt something into using either the same bolt or a bolt the same size, longer or shorter, whatever. Then you need a clip, like the clip that holds the original ruck seat to the frame, that allows it to flip up. They have stuff like that at any big box hardware store. You might even be able to order those clips from Honda and use them. If you want access to the storage, the seat will have to flip up. You can tighten down the clips with rubber insulation to get it so the flip up action is a little stiffer. Just get creative and you might have to modify some parts to get it to work. You’re going to trade secure-ness for flippy-ness. I think you can get it to work.