SKR Mini E3 V3.0 VIN pin shortage
I have an issue and would like to know if BIGTREETECH can help me out. I have and SKR Mini E3 V3.0 with a SKR TFT35 E3 V3.0 a BLTouch and a BTT Smart filament Sensor for my ender 3v2. I have been having issues with compiling the firmware and getting everything to work flawlessly. After a perfect compilation of the firmware when trying to level the bed the nozzle kept smashing on the glass bed, issue was fixed by commenting Adaptive_step_smoothing. Now BLTouch works flawless but now my prints stop midway or at almost complete with a m1 stop error message. After a couple attempts i notice and heard a spark from the board, when i looked the VIN pin looks to be shorted and now it will not print after bed leveling and heating, stays parked and timer is counting down fast and nothing is printing. Please help, i have bee having may issues with BTT products and I'm really close to throwing everything away and calling it quits, really disappointed at this time. Again please help anyone.
Posted Sep 9, 2022, 6:43 AM UTC
You can try resetting it there is a reset button on the board, if that doesn’t work the board is probably junk they don’t like sparks ⚡️. I had two of those fail and I switched to skr pro and had no problems.
Thank you very much for the assistance, to be honest that actually worked. Held it pressed for 10 seconds just to be on the safe side, did bed leveling and started print after and worked like nothing ever happened. Again thank you very much for the help.
Any time glad it fixed it for you 👍