GuliKit - Touching analog sticks not registered
I soldered the wires to the GuliKit modules but touch won't work on either of them. I de- and re-soldered them again, no change. Then I soldered them back to the original modules and it works.
It seems unlikely that both modules are defective, but I also can't think of anything I could have done wrong. Any ideas?
Posted Oct 9, 2022, 12:37 PM UTC
Apparently there are two models of analog sticks that Steam Decks use and you must have Type A for the capacitive sensor to work on the Gullikit sticks.
Reinstall your original sticks, go to your Settings > System and look at the Steam Controller ID. MEDA is Type A, MHDA is Type B
Thanks. It's type B. That would explain it I guess. Amazing that they don't mention that anywhere.
I assume fixing this would require a hardware revision on GuliKits part so there's no point in keeping them?
They didn't mention it anywhere because when gulikit released the sticks for the deck , steam decks only came with the original type A sticks.
The type B revision has only been shipping since early September and I believe there is still a mix of type A and type B being shipped.
And yes probably no point in keeping them , might be worth seeing if you can contact gulikit and letting them know and see what they say
Would love to get notified of any replies to this
No reply so far. Doubt I'll get one.
Aw crap.
Didn't install mine yet (due to the soldering), so should be able to return them through Amazon, hopefully.
I’m wondering whether it’s possible to make a software change. Tell the steam deck that it is using MEDA sticks instead of MHBA? I’ve got gulikit sticks in my deck, replacing type B. Weirdly they seemed to work fine when I turned on gyro in FFVII Remake. But then the latest update came and I tested it in Aperture Desk Job, and they don’t seem to work. Checked again in FFVII and no joy. But I’d imagine if you could tell the deck what to expect, they should work fine…
I wanted to second your findings. When I first installed the gulikit (around sept 20, 2022), the touch caps worked. I'm not sure which update exactly but they no longer work now.
If a software update broke the functionality, you'd think a future update could fix it again. I'm not sure about the A and B version thing but I got my deck a 4 weeks ago.
I’ve also spoken to Gulikit and they’re looking at making an updated version. Though I hope there can be a software fix.