r/HomeImprovement•
_145_

Wiring a furnace help

Sorry, I'm a bit lost here, I'd appreciate any help.

Image here: https://imgur.com/a/6TROks4

I have an old Rheem furnace. I don't have AC, just heat. It currently has only 2 wires (red + black) and I wanted to add a smart thermostat so I ran 18/5 wire from the thermostat to the furnace so that I can have a C wire. I attached the wire the same as before: Red to R, White to W.

I added the pigtail. Previously, the black wire went directly to the "C" terminal on the transformer. I added the pigtail so that the blue wire could also go there. But the other end of the blue wire isn't attached to anything right now.

After I ran the wire, I hooked the red and white up to my current thermostat and it didn't work. So I connected them directly and the furnace still didn't turn on. Then I took a multi-meter down and started seeing if I could figure anything out and discovered that the voltage from R to C on the back of the transformer shows 0 volts. I can test and see that the income lines to the transformer have power.

Did I short and fry my transformer?

Did I do something else wrong?

It's frustrating, I thought I hooked it all up right, and now it not only doesn't work, but I think I created more problems.

Posted Nov 6, 2022, 9:00 PM UTC

115
Loading comments…