It seems like they might be a bit too big to fit the size requirements, but I don't especially want to wear it.
8spd
u/8spd
I'm looking to replace a router in a hose with a 12 year old, and wanting to be enable some screen time controls. The main thing I'd like to implement is limiting his access to certain websites/apps to a limited amount of time per day. For example only 1h of TikTok per day. The routers I'm familiar with only allow time of day blocking of the entire internet and porn blocking, but I want him to be able to access the internet all day, but not be on the same "brain rot" all day. He uses a PC and an iOS device. We have some limitations set up with iOS screentime, but he just moves over to his PC to keep watching TikTok.
I don't need it to be high security, but it should not be automatically byp
I'm looking at installing NextCloud for the first time, and am reading over the official install instructions for AIO. I'm not very experienced with Docker, but the other image I installed (Jellyfin) used a compose file. This seems handy to me, because I do not have to keep track of the command used to run it.
I presume I'd have to run the same command every time I reboot the server, which I do every 2 to 6 months, infrequently enough that it'd be a pain to remember every time.
Would it be wise to use a compose file? If so how would I modify the official install instructions to do so?
I've been using the default gnome sound converter called "sound converter" for years. It seems to do the trick for short sound files, like songs, and I like how easy to use it is. But when processing long audio files, like audiobooks, it messes up the length of the audio file, leading to issues playing on some software, and causing the rest to inaccurately report remaining time left, and have issues starting play back from the middle of the file. It also seems to take a long time to transcode audio files.
I'm currently using v 4.0.6 on Debian, but these issues have been a problem for years, and on Ubuntu too, I think.
I can use ffmpeg to do the conversion su
I've got Debian 13 and Gnome 48 on my laptop, and Android 16 on my phone.
I want to by able to have some PostIt note style application running on my both my phone and laptop, that allows me to sync notes to both. It would be good if the apps were lightweight, allowed for self hosting when I get around to it, but cloud based hosting to start with is better than requiring complex set up. And a clean, minimalistic UI is to my preference.
What do people recommend for this?
I've googled this question, and the general consensus seems to be that the mesh network is not comprehensive enough for it to be a good choice to track a stolen vehicle, and that it's better to go with an AirTag. I'm not an Apple user, so I got an Android tracker, and I like the tiny size, ease of use, and crazy good battery life, but it's accuracy is often bad. Sometimes I get satisfactory accuracy, but sometimes it shows me a 1km area where the motorcycle could be.
So my idea is to use the google tracker to get myself in the general area of the bike, close enough that a Meshtastic device I would carry would be in range of one on the bike, which would report it's gps location to within a
I saw a few episodes of a show, in the early '90s on Canadian TV. I think it would have been filmed a few years before. Set in Iceland, filmed in the early '90s (or late '80s). I don't remember the full plot, don't think I saw enough episodes to know. A sailor with a rifle comes to town by ship, gets into some trouble, and runs off into the hills. The main thing I remember about it was how impressed I was with the Icelandic landscapes.
I've used the Strava heatmap to edit with JOSM in the past, and did it using the Firefox extension, following its instructions and it has worked well in the past. But when I do it now, all I get is Error: HTTP error 403 when loading tiles. Is there a way to get this working?
I'm leaving for a multi day hike in a few weeks, and I can see the trails on the strava heatmap page on strava.com, and the alignment and geometry could be improved.
My 10 year old home server has died.
I would like to reuse the case and powersupply, so I want to get a replacement mini ITX board.
What's a good deal these days? It's used mostly as a NAS, so pretty low performance requirements. I currently have 4 drives plugged into it, but the case accommodates 5, so having an additional SATA port would be nice, but having the ability for a M.2 nvme drive would also be cool, and I'd put the boot drive on there instead of a 2.5" SSD, so 4 SATA ports with a M.2 port would be even better.
I think Gigabit Ethernet is pretty standard these days, but I would need it to be at least that fast.
Other than that, price and reliability are the only concerns. I
I noticed that apt recently was updated to 2.9.2. With this update I see some very nice looking new formatting, when it presents the changes it's requesting confirmation to apply. But at the same time I'm getting far more packages held back, and more conflicts, that I resolve in aptitude. (hopefully resolve properly, I don't feel very knowledgeable about this process)
Are the two related? Has the recent update to apt caused it to be less able to deal with conflicts, or is it an unrelated effect of how packages maintainers are managing updates other packages?
Any recommendations to deal with this, or is it just an effect of running Debian-testing?
I'd be interested in tracking my heart rate, I don't want to spend much money, but don't want to wait to have something shipped from China. What budget HR monitor, that works well with the Strava app, do people recomend?
I'm upgrading my home partition to a new drive on my home server.
My current set up has 3 drives, one for root, one for /home/ one for /home/8spd/Videos. On the home drive there is a folder that contains about 70 snapshots. I'd like to keep them.
I'm running Debian Bookworm, no GUI, mostly accessed by SSH, but can plug a monitor into it if I need.
Normally I'd partition the new drive, use rsync to copy everything to the new drive, and edit fstab to mount the new drive at /home. I don't think this will work with the subvolumes, because they will just be copied as if they are folders containing large numbers of files. More than would fit on the new drive, and I want them to remain snapsh
I recently got a new server to run jellyfin on, and I want to move my jellyfin install onto it.
My use case
- media files on a NAS
- 10 to 15 users total, only one or two on line at the same time.
My old server
I put together my old server with the idea of just messing around and testing different bit of server software out. I ended up really enjoying Jellyfin, and giving accounts to various friends.
- Ubuntu server
- installed from official repositories, via
apt
My new server
A bit faster, and more powerful.
- Debian testing
- Docker install
I want to migrate the users over to the new machine, with their watch histories, preferences, passwords, etc. Ideally my frie
I'd like to upgrade the server I installed Jellyfin on, it was more like a test install, but have been running it for a couple of years now. It's on my shelf, in the living room of my small apartment, so I want something that is small and quiet. I was thinking of a ThinkCentre Tiny, or a NUC. I don't have a big budget, was thinking of getting something second-hand on ebay, about 350 CAD. Sometimes one of my friends might be online the same time as me, but usually it's just one user at a time.
What do people recommend?
Edit: I probably should have said that I'm running Linux, Ubuntu currently, on my server.