CndConnection

Hi folks,

Sorry for posting a help thread but maybe others are having issues and down the line it could help future googlers.

My specs: 4070 Ti, Ryzen 7 5800XT, 64 gigs DDR4 ram, game installed to NMVE only for DCS.

I mainly play Contention Cold War and a few months back some of the PVP servers. I play exclusively in VR (Steam/Valve Index).

I am not able to spawn in the BSC Server for Cold War (tried Syria and Germany versions) and for the 4YE Syria or Caucusus server, it crashes upon finishing mission load.

I am able to join in and play Cold War Contention without issues and currently that's on Caucusus. Also no issues with Singleplayer.

I once had a problem where I couldn't join Co

Hi everyone,

This is seriously bugging me and my team and I thought maybe I figured out the cause but it seems I was wrong.

The issue: Our team uses various online excel based spreadsheets connected through sharepoint.

When we select a cell and right click to add a new comment (or use ctrl+alt+m) the comment text box appears.

Everytime we begin typing, instead of adding our text to the comment text box it begins writing in the cell that was selected for the comment and overwrites whatever is written.

We thought the first work around was to ensure you click, multiple times, into the comment text box to ensure your cursor is placed correctly. This sometimes gives you the impression th

Hi everyone, I will fully admit I am a novice at this stuff and know very little but am trying my best to complete a V8 swap with some friends who are very knowledgeable and skilled (at welding etc). The issue is they don't have much knowledge about V8s and old transmissions and neither do I.

I have a L33 Aluminum 5.3 Vortec V8 that I am swapping into my 1985 RX7 FB. I know the easiest solution is to use a T56 trans most likely from a 4th gen Camaro. Very few of those in my area so I am looking at the T5 World Class transmission.

From what I've read I am supposed to look for a T5 with 26 splines. I don't know necessarily why though, it has to do with the clutch.

There is a T5 world class

Hi folks, I have a 99 Civic EM1 and the hood was perfect until yesterday when I woke up and went outside and saw it was fucked.

Thursday night I brought it to my buddy's house and we did a valve cover gasket change on the engine and oil change. Hood closed fine and car drove fine.

I left his place as it was getting dark and didn't notice anything amiss while driving home.

Next day I wake up and walk to my car and the hood is horribly fucked...just not sitting right at all. I thought maybe it opened somehow and pulled it open, closed it again hard and it stayed fucked.

Here are some pictures: https://imgur.com/a/Qp7FSDv

The problem is not with the latch as the hood fully engages both lat

Hi everyone,

I don't use tablets and am unfamiliar with them but at work recently our firm purchased another firm and part of the process was to wipe all the drives off their devices. We sold what we could and kept some devices for our use or for e-waste.

The IT guy gifted me a wiped Zen Pad 10 Z300 series and when I follow the steps to set it up I get this message: https://imgur.com/a/D0h14tO "This device was set to it's factory settings. To continue, connect to a network and sign in to the previous Google Account (required)".

That account is no more and the employee who might have held that account now works for a different company.

Is there anything I can do to get around this? Is

Hey folks,

I've been repeating this meme with my friends at work but I can't find it anymore and it seems to be hard to find and they don't believe me that it exists lol. It's really dumb but I know the script and maybe you guys can help find it or know the source of the meme.

Bout 3 maybe 4 weeks ago it would pop up on the various instagram car meme pages, there were variations but the source audio was always the same.

The meme is a nerdy honda guy or non-mopar car guy trying to fit in with scat pack dodge guys. In the audio the nerdy voice talks and then dude-bro voices mumble in agreement after him.

"How bout them scatpacks? uhh...scatties!" "I am gonna get a pack of them uhh....swi

Hello everyone,

Hopefully people with good electrical knowledge can help out. I have a 1982 Honda CB125s and it came with a 6V system. I am trying to complete a 12v conversion but ran into an issue with the turning signals. The bike has a 12v front light, 12v battery, 12v rectifier regulator, the correct LED flasher unit.

Motorcycles that use a single bulb for a turning signal indicator run into an issue when you convert to LED : all your indicators flash at once because power is recirculated to the other flashers. On motorcycles with left and right arrows for signal indicator on the dash this doesn't happen.

The solution provided is to splice in a diode kit into the front turning signal

Hi guys sorry for the total newb question but I am getting my B18b1/GSR Head Civic tuned in a month and the ECU has a "DGtune" Ebay base-chip on it.

The tuner I am going to use can work with those but he has asked me to remove it from the ECU and take photos of it and the ECU socket.

I was going to disconnect my battery and do that but then I realized I don't know about this stuff and got paranoid that it might re-set the chip or re-set my ECU and make the car run worse.

Anyone got experience with those types of chips ? Here's a pic of it :

I just wanna know if it is safe to disconnect battery, remove the chip, and replace it back.

Thanks for reading

https://imgur.com/a/XMdq0Vq

Hi everyone,

Lately I have spent a lot of time reading up and watching videos on detailing and detailing products as I acquired a 99 EM1 SiR Civic with new paint that I want to keep in best shape as possible.

This post is about my mom's Kia Rio that I spent two and a half hours detailing for her as a birthday gift. I did the two bucket method, bought a foamer, and used Maguire's soap (can't remember the name but it's ultra sudsy stuff).

Before starting I worked on the wheels first and cleaned them up good with just Simple Green and a wheel brush then I rinsed, foamed the car, and two-bucket method hand washed it while re-applying more soapy foam.

Got down low and made sure to really was

Hey folks,

I have a 99 civic that has a swapped engine. The block is a 99 LS B18b1 and the head is a 93 GSR Vtec. I must admit I don't know everything about cars and engines and don't know if the injectors inside would be from the original 99 Civic and what ever engine it had, or if they are from the 99 LS Integra or from the 93 GSR Integra.

Two of my injectors are a bit sweaty with gas at the top and my car's engine bay sometimes smells strongly of gas after a few pulls or spirited driving. Startup is fine but once in a while it hesitates when normally it doesn't and sometimes the idle can be rough and below 1k. All symptoms of injector oring failure so I want to replace them all ASAP and

Hi everyone,

Wondering if anyone ever successfully got through this issue. My mom uses a Roku and has a 720P TV. Never had a problem with Roku until recently where she turned it on and the image appears zoomed in cutting off sections on the side.

I tried to navigate the settings menu and no matter what the Roku always chooses the option to display at 1080P despite the TV being 720p.

It's almost as if there was a recent update or something that made it so Roku no longer supports 720p or something. Is that the case?

I can't seem to reverse it or change it back.

EDIT SOLVED Thanks to rsun and Important-Comfort. The issue was with the TV. I did not know that each input could have it's own

Hello folks,

I have a WE m16a1 and I want to convert it to an XM177. I know all the parts I need and I can get them from KYairsoft but it's expensive and I was wondering if anyone has a broken/bone-yard WE XM177 GBB they would like to part with.

I need it mainly for the front handguard/barrel swap and the buffer-tube/stock swap. You don't have to sell me the receiver/internal parts beyond the barrel if you don't want to.

If you have the complete broken gun and are looking to sell for around 200 CAD or so I am willing, it doesn't need to shoot I just need the parts un-broken.

Thank you for reading.

Hi there,

On the support page for multi snap it says that if you decide to save it, the result will be saved as a seemless video.

However for me that is not the case, if I make a multisnap and decide to save it to my memories it saves it as separate snaps and they aren't connected.

Anyone else experience this and know how to save them as seamless ? Thank you