DoStuffAndStuff

Sorry for asking this here but I basically bought a PS4 for RDR2 so thought I'd try here first.

I plan to get a 4k HDR TV soonish but not soon enough for game release so I wanted to know how RDR2 will play on a 1440p monitor? I heard it will be either 1440p or 1800p but not sure?

Pictures here:

http://imgur.com/a/R2M8INJ

I saw the position of the text compared to pics of legit ones and immediately thought they were off, but wanted to confirm here.

When I first got my Surface Book I found this article describing how to disable the cameras on Windows 10 and I did it partly for security and partly because I never use them.

Well now two years later I need to use them for an interview, and can't figure out what I did to disable them. I've read that you can do so in the device manager, but I can't find anything that resembles the cameras in any of the sections of device manager.

I don't know if it makes any difference, but I have a Surface Book as mentioned, with Windows 10.

Thanks for any help

I need to post my phone to my insurer for repair, and I'd like to power off the phone before surrounding it in bubblewrap and enclosing it in a parcel. Problem is that the screen is a completely solid colour when on so I can't see anything. I've reset the phone already but now I don't know how to turn it off.

I read you can do it by holding down volume up, volume down and power button for 10-20 seconds, but every time I do that it just seems to restart the phone and the screen turns back on.

Any ideas?

I turn on entertainment mode when watching YouTube or something to increase the screen resolution, then I turn it back off to save battery when I'm not watching anything.

The problem is that turning the screen resolution down to FHD switches my home screen icons to a lower Res version, then when I switch it back up they stay low Res so end up looking all fuzzy. The only way I've found to fix it is by manually editing the icon to reset it.

Does anyone have a solution to this? It's a small problem but it's been bugging me ever since I got the phone!

I'm looking at swapping out my PC from a mid-ATX to mini-ITX case. I'm hoping to keep as many components as I can so it doesn't become too expensive. So far I know I need a case, motherboard and possibly a new CPU cooler.

So I was wondering if anyone had suggestions for a good m-ITX board that would fit a 6600K, GTX 1080 SC, and also have space for an M.2 SSD (this is what I'm struggling with since I can't tell which boards have space for an M.2)

And a bonus question: Do most mini-ITX cases allow you to use a full size PSU? I have an EVGA G2 and I'd preferably keep it instead of having to get a new one.

Thanks!

I had a problem with my Windows 10 install being corrupted, so I used the official Creation Tool to create a USB install. It worked fine and I formatted the HDD then continued with the install. At the end it says that it needs to restart to continue, but after the restart it just resets the whole process from the beginning.

If I unplug the USB during the restart/boot into the HDD manually after the restart, it says to select correct boot media (something like that.) But I can see via the USB Creation Tool that the install did create several Win10 partitions on the HDD.

I thought it was a problem with my mobo boot order, but I've tried booting straight to the HDD and back to the creation

I recently went away from home for a week so I shut off everything at my setup by the plug for no particular reason.

When I got back and turned on my PC, it booted to a Recovery screen and said something along the lines of "The application or operating system could not be loaded because of a failure" then showed a certain file in the system32 folder that was corrupt/missing.

So I set up a recovery USB with Windows 10 on it and when I try to boot from it via BIOS, I just get the Win10 logo with a loading animation which seems to lead nowhere. It's still currently going but I'm afraid to shut down in-case it is actually doing something.

Specs:

Windows 10

i5-6600k

GTX 1080

16GB DDR4 RAM

So I have started building a new prison, but I have a problem with dead bodies. They get transferred to the morgue fine, but then a hearse comes every 15 minutes or so and just sits outside 'processing'. But then after a while it just drives off and the bodies remain in the morgue.

I've tried rebuilding the morgue, building a new morgue (see by the prison entrance) etc. and nothing seems to work. I've got enough free guards so there isn't a problem with transporting the bodies neither.

Any ideas? See below for a pic. http://imgur.com/a/EEQvj

I am pretty early game after just picking this up, but I can't fix this issue at all:

I built a staff room for staff to rest, but every time prisoners go to eat, half of them rush into the staffroom? When I set it so that it's a staff only area, I get an error saying "There are no prisoners assigned to eat at this canteen" even though the room is obviously designated as a staffroom. What am I doing wrong?

I'm looking at upgrading my speakers, and I have two options

I am looking at something like these: Q Acoustics 3010 - Which seem to be okay for the level I'm looking at, and they're also not massive which is a plus. I was going to pair them with this amp: SMSL SA-50

Overall the bookshelves would be around £200 for the price I can get everything.

The other option is something like the Logitech Z506 for ~£50. I'm just wondering if the bookshelves would be a noticeable quality difference over the Logitech's considering the pri

Hi,

I don't know if this is the right place, but now and then I have an issue that pops up randomly with the tap-to-click feature.

Normally you just tap the mousepad with one finger and it acts as a left click, but randomly it will change and tapping acts as if I were holding down the left mouse button. The only way I can fix it is by restarting.

I was wondering if this is a software issue that people have found a fix for, or if I should just ask MS about it since my laptop is still under warranty for a few months.