FourFingerLifeHug

As the title says. I can't access my Tautulli via my nginx reverse proxy. It just times out. I can, however, access it via the servers's IP and the port directly just fine.

It should also be noted that PlexPy was working perfectly fine with this exact configuration, and I'm also proxying Sonarr, Radarr, etc exactly the same way and everything is working just fine. Any help would be greatly appreciated.

Cut useless nginx configs    

Edit: Nevermind, I'm a fool! My host was having DNS issues today, and my automated script to keep my DNS names up to date failed, and set the IP address for the Tautulli domain to the wrong IP.

I've got a Raspberry Pi 2 that can no longer access the sd slot, USB ports, or Ethernet jack. Wondering if anyone in the city does repairs on them.

If not, does anyone want a non functioning Pi 2 to attempt fixing themselves?

A scaredy-cat.

Credit: My nine year old.

So I have a Prusa i3 clone (made by FLSun) and today out of the blue I'm getting thermal runaway when trying to print. (Slicing using Slic3r Prusa Edition).

I have my first layer set to 205 then drops down to 195 for subsequent layers. When the second layer starts, the heater starts to cool down, but goes beyond 195 (drops to about 190) then starts heating back up. Except it seems to have trouble actually getting back up to 195. This must trip the thermal runaway protection in the firmware as it's not getting back to the target temperature in the given time (that's my understanding of the Marlin firmware's protection).

If I print at 195 for all layers, I don't have this issue at all. I've