I'll have to look at the settings again, but I know for sure the speed isn't very high... Maybe 60 or 70 mm/s tops. Also, I don't have a part cooling fan (can one be added to Prusa i3 clones?)
Even if there’s not, you could wire your own 30/40mm fan direct to the printer’s PSU or something. There will definitely be a way to do what you want to do
imgur.com
Adjustments to bridging settings:
Significantly increase speed
Slightly increase extrusion
Fan to 100%
I'll have to look at the settings again, but I know for sure the speed isn't very high... Maybe 60 or 70 mm/s tops. Also, I don't have a part cooling fan (can one be added to Prusa i3 clones?)
Thanks for the suggestions!
If I’ve learned one thing about 3D printing, any part can be added to any printer.
What printer do you have? I will almost guarantee that a fan can be added to cool your prints
It's a FLSun Prusa i3 clone. I'll take a look at the board and see if there's a header for a fan.
Even if there’s not, you could wire your own 30/40mm fan direct to the printer’s PSU or something. There will definitely be a way to do what you want to do