Human-Byte

I am looking to change to OPN for my main firewall. As someone who has an LCD display that I refer to regularly, what is the current state of play in terms of configuration and settings persisting after an upgrade?

I see multiple comments saying that they lose the settings and config (which seems odd).

Running upgrades shouldn't really remove plugins and or settings should it?

This is the one small sticking point stopping me from installing...

Someone please tell me good news as of the end of 2025 :)

Does anyone have any clue as to what is happening to the 5G and 4G services in Caringbah NSW at present. There has been a pretty much constant "planned maintenance" showing on their website. With abysmal service to go with it.

If they are replacing equipment surely this shouldn't take months?

so this https://www.ui.com/download/edgemax ends up as 404.

Has anyone found where they are hiding all the firmware updates these days for Edgemax line?

​

https://preview.redd.it/d1ll5jum9qm91.jpg?width=2691&format=pjpg&auto=webp&s=e0a91e9f13aecc814c00f0b9fcf6219030499365

Been putting this together for some time. Not as extreme as some but it does nicely for a apartment build. All fans where possible have been replaced with Noctua. I elected for all switches to be at the back for neatness as it resides in home office. The wheels make it easy enough to move when I need to.

- Sophos SG330 running pfSense - with 10GB SFP+ card option

- Dell R220 - Roon Server

- Dell R220 - VMWARE - Zabbix/Emby/Unifi Controller/APC UPS Control for VM box/PiHole Recursive secondary DNS

- TrueNAS Scale - 32TB - 10GB - Custom bu

I posted this on Netgear forum also but no response. Hoping someone else may have seen similar weirdness.

SXK80 in AP mode with 2 satellites (Latest firmware V4.2.1.120) - VLAN tags provided by pfsense router. (VLAN30 and VLAN50) - smart switches throughout (Trunked and tagged appropriately). VLAN setup on SXK80 is all ports are set to default VLAN1 and Trunk. Three WIFI networks in use - Default, VLAN30 tagged and VLAN50 tagged. Default wifi network (on default vlan1) works without issue - I use this as my main wifi network and is solid. However, as soon as I swap to either of the other wifi networks with VLAN30 and VLAN50 tags respectively - it seems to break sync on the satellites (tur

Bought a second hand SG450 rev1. Was assured it was working. However, connecting a vga monitor shows absolutely nothing. Connecting to com port shows nothing. It’s like it just can’t get to a boot state. Display shows Sophos Protection. What am I missing here? Is there some sort of full reset that can be done?

Wanting to transmit VLAN tagged packets via wifi. Can it be done? Currently using Orbi RBK50 kit.

Scenario - pfSense -> Edgeswitch -> Orbi Mesh --> Orbi Mesh Lan out -> Edgeswitch -> UAP Pro AP

I can get normal LAN working via the AP Pro with one network/wifi network.

I can get the AP Pro to distribute VLANS properly on a fully wired network, but as soon as I put the Orbi Mesh between - it seems to be stripped of all VLAN packets.

I have no issues with the Orbi wifi system currently - just trying to setup a secure wired and wireless setup remotely from the router and separate to the Orbi network. All switches are managed.

Anyone achieved this? What am I missing here

Cargowise AU are going to remove the desktop version of the Borderwise tariff shortly. They are going to move purely to the web version. If you have ever used the web version, its functionality is abysmal for day to day brokers and classifiers. This is clearly being done by people who do not use it in a day to day environment. This is a joke. If this concerns you then please get in contact with your rep and object. They have already started the transition and was done with no consultancy to industry other than a random update note (that no one sees). Pretty sure everyone pays a princely sum to use this program so why can't we ask for better.

So have been trialing a TM1 for use in our live rig. Trying out various triggers (non Roland), the unit seems to have some rather odd behavior. The unit shows that each 'trigger' is received according to the indicator light on the unit - however the output of the chosen sample is extremely erratic in terms of consistency. Hitting the trigger 5 times the same will result in 4 normal outputs and then one either extremely loud version or no output at all.

Have tried all settings to try and reign this in but still no consistency. Is there something I am missing or is this normal? Or do I have a faulty unit? Or is there something special about the output of Roland triggers?

We need to use

Question for the brains trust.... Is it possible to replace the fans in any of the older type servers (DELL HP Etc) with some Noctua type fans without the system having a freakout because it can't see the fans running?

I know that many of these machines are designed for server rooms (Or basements) so noise isn't a factor, but what about for those that live in units and still want to play with "labgear"?

Has anyone else noticed a big change to the layout on some screens?