InfiniZ
u/InfiniZ
Hey folks -
In the past, I had 3 Pi's running on my non-Unifi network. A Pico W running Pi-Hole, a 4 running Home Assistant, and a 3b+ running MainSail /w Klipper (3d Printer). I've now had my UDM-Pro along with the rest of my infrastructure up for about 6 months and decided to get them all up and running again, however I can't get the Pico or 3b+ connected at all - while the 4 seems to be working fine.
99% sure it's not a Pi thing, as I have tested wireless on both, and wired on the 3b+, using a separate Netgear router I have available. Both seem to work just fine there.
Curious if anyone has any info on incompatibility issues with older Raspberry Pi models and the latest Unifi softwa
I've got a CSV file pulled from one of our password tools that provides username, user id, and the date their password expires (along with some other non-helpful info). I'm wanting to trim it down, and also add another column to the end to add in the net user "Password expires" result to compare my password tool's report to what net user returns.
My code below returns the net user "password expires" entry I'm looking for, but it's appending it to the file multiple times per entry. Does my -append need to be outside of the loop? And if so, how do I record the data for each entry in the loop?
$OldCSV = Import-Csv -Path c:\temp\csvhere.csv | select "User ID", "Date password expires"
N00ds - Timestamp is off a few days because I was lazy. Sorry...
| Items | Notes | Price |
|---|---|---|
| ~~Sa |
We have a Skystream 3.7 that recently stopped generating power for us. It’s not spinning with a moderate breeze at all, but it is rotating around to face into the wind as it should.
The company that made them went out of business in 2013. I’ve tried contacting Northern Az Wind and Solar and they don’t support it.
Curious if anyone has any leads or info.
[Ammo] FN SS195LF 5.7x28mm Lead Free Hollow Point (500rds - 10 boxes of 50) - $399.99 + $35 to ship (88 cpr)
familyfirearms.com/product/fn-ss195lf-5.7x28m...https://i.imgur.com/3sbNeSk.jpg
Above is what I'm working with. I have the tank bled down to just under 28 PSI (from the stock 38). The pump is set to 30/50 (stock) on the pressure switch. Turning it on, everything works beautifully until the tank gauge reads 45 PSI and then the pump short cycles on and off. I'm fairly new to this (if you can't tell by the pvc primer everywhere) and just trying to make use of a cistern we have on the property to water our garden.
Does my system not have the ability to push more than 45 PSI? Should I adjust my pump to 20/40 to compensate?
Let me know if you have any suggestions or if you need any more photos of the s
Ended up shorting out my thermistor while cleaning out a particularly bad clog in my hotend. It left my printer booting up to just a blue screen each time. Ordered a new thermistor and installed it last night, hoping getting a temp read would fix the problem.
Turns out the PSU is also shot as I'm not getting 24v to the board now when booting, even with all of the other cables unplugged (no load except for case fan).
As I wait for my PSU to arrive, I wonder if there is anyway to test the board (4.2.7) as well before putting in the new PSU. Anyone else done this before and had to purchase all new internals?
Anyone have any recommendations for a PCP? Male in my early 30’s and haven’t been to a doctor in probably 10 years. Should probably get in with someone to have all my bits checked. Was hoping people would have suggestions for an office they like.
Wife found the hard case - looked inside - and then used Google-fu to figure out I spent $$$.
Gotta sell some of my shit laying around now.
Crye SPC -- $600
~~I REALLY REALLY wanted to like this, but my love for my JPC 1.0 is just too strong. ~~
Plate Carrier will come with the following because I am WAY too lazy to take it apart...
* Crye Precision AirLite SPC in size Medium, Coyote
* Crye Precision AirLite Structural Cummerbund in size Medium, Coyote
* Crye Precision AirLite Configurable Radio Pouch, Coyote
* Crye Precision Pack Zip-On Panel 2.0 in size Small/Medium, Coyote
~~* Crye Precision AVS Detachable Flap, M4, C
Oh boy, my childhood is SCREAMING right now! Yes, I am new here but I have 30+ trades over in r/GunAccessoriesForSale (not sure if that matters). Feel free to check my profile for my flair over there.
I'll go through different groupings I have setup. Will try to list prices as best I can. Please feel free to leave a comment if you'd like a solo photo of a card (front/back). Please note I will note be de-sleeving any cards, but will attempt to show any imperfections as best I can. All sales will be Paypal G/S and will only be shipped to the verified Paypal address on the invoice that is generated.
[PROMO
