JDP1982
u/JDP1982
I have a number of trees that are extremely close to a block retaining wall and a paver sidewalk. While I don't have any problems yet the roots are very close to the block wall. Root barriers are pretty expensive and this wall unfortunately is about 5 ft tall and 80 ft long. My neighbor suggested that I use foam boards instead of root barriers. Normally I wouldn't even ask because I couldn't find any information on it and I just have some serious doubts, but my neighbor what's a contractor and is a pretty knowledgeable guy who likes to be helpful. Could foam board hold back tree roots?
Not sure if this is the right place if it isn't I apologize and please let me know.
My work trailer was stolen which was filled with a large amount my Milwaukee Tools (all of them except a spare impact driver). At the time I found a great deal on some DeWalt tool so i switch Brands boy was that a Huge MISTAKE! I'd always heard all these great things about DeWalt so I figured that they'd be pretty close to the same quality as Milwaukee and I would save almost $1,000 I went with DeWalt. A few months later and a number of broken tool I've switched back to milwauke. The dewalt tools just didnt hold up as well as the Milwaukee Tools. To me the dewalt tools aren't the same quality as Milwaukee. The final straw for me was when my Dewalt SDS plus rotary hammer drill stopped worki
I learned a lot from this project and had a lot of fun in hindsight I wish I would have done all three levels rounded corners instead of 2 square levels and 1 rounded. Honestly the hardest part for me to get right with the staining, I ended up putting on way too much the first time around and had to sand it down and stain it again. Any suggestions or tips are greatly appreciated
Zavvi has 958-Piece LEGO Technic 4x4 X-treme Off Roader Building Kit (42099) for $209.99 - 20% off w/ promo code LEGO = $167.99

Ive made my son a desk for doing school work (since school was canceled for the rest of the year in my state) my 7 year old is pretty rough on most things. I need something that is easy to apply and offers maximum protection from the wooden desk. I've done a lot of research and I know that the clear epoxy is above my skill level and requires too much time for a single parent to do while homeschooling and trying to work from home. I'm leaning towards an Oil based polyurethane? Any suggestions on brand and how many coats any tips will help my only experience with this is watching some YouTube videos but my kid needs his own area to do his homework the kitchen table is not going to work for the
I need to remove some dirt from a crawlspace to make room to work on the pipes under the house. I'm not digging out the entire crawl space but it will be a fair amount of dirt. Any suggestions on the easiest way to get the dirt out of the crawl space? I really don't want to carry it out in 5 gallon buckets. It's a red clay but its a pretty dry red clay. I searched on YouTube maybe I didn't word it correctly but about the only thing I could find was to rent a vacuum truck. Which I'm sure there are none around me. Way out in the rural mountions.

A few questions- I have an unfinished basement with cinder block walls the house is approximately 14 years old. I live in zone 6 but I’m borderline zone 7 in the US.
is will the thicker waterproof plastic vapor barrier hold up for 30 to 40 years on the exterior wall? There are no large cracks but there are cracks in the mortar between the cinder blocks (70% of the mortar is cracked, all small hairline cracks) I was going to chisel out the crack mortar and replace the mortar then I was going to take surface bonding cement and bond the inside wall and the outside wall. Any suggestions or ideas would be greatly appreciated but I have some major concern about the cinder block basement wall.
The question are answered THANKS for the help.
my rim joist In my basement are frosting because of the cold air meeting the warm air. (No water leaks in the house and it hasn’t had any precipitation for about eight days. My question’s are:
would it be doing it in the walls?
And I was told to use rigid foam insulation and then use cans of diy spray foam to seal the rim joist will this work?
Wouldn’t my framing in the rim joist be having the same problem with the frost? (And if so is there anything I can do)
Is there anyway to add flashing to a pre-existing deck that’s bolted to the house. It is on the third story of the house
I have a number of videos on my iPhone, I was wondering what is the best storage method? I’d prefer something free but safety and quality do matter. Thank you
I hope this is in line with the rules, if not I apologize and will delete the post.

