LynxesExe

u/LynxesExe


r/Battlefield6•

This is a rant, there is nothing of value here, but have fun if you want to.

In Battlefield 4 there is a character called Dunn that dies, in a car, after you are forced to shoot through the windshield while the car is underwater to save yourself and everyone else. Dunn can't move as he's stuck, and the reason why he's stuck is that he made us cut his leg off because it was smashed by rubble as the Tombstone squad survived falling off the top of a building being attacked by an helicopter. All of this while saying the legendary sentence For the wolf to survive, he's gotta chew off his own leg.

This is to say, it made sense, there was a development, and overall the way Dunn died was unfortu

01

r/watercooling•

Hello!

For the past few years I had a custom waterloop, it works incredibly well, however I'm trying to figure out if what I'm getting is within range or below expected performances.

The setup is as follows:

Rads: 3 x P360M EK Quantum Surface
Pump: EK-Quantum Kinetic TBE 200 D5 PWM D-RGB
GPU Waterblock: EK-Quantum Vector² AMP/Trinity RTX 4090 ABP Set D-RGB
CPU Waterblock: EK-Quantum Velocity² D-RGB - 1700 Full Nickel
Fans: 6x ARCTIC P12 PWM, 3x Lian Li Galahad 360 fans (recycled from an AIO I had before)

As for the rest of the component:
CPU: 12900k / usually generates around 110 watts.
GPU: 4090 from Zotac, OCd at around 3000 to 3045 MHz at 1.1v. Usually pulls around 450 w

034

r/blenderhelp•

I have been joining two meshes, one for a torso and one for an arm.

In the screenshot there is a polygon that doesn't have a black outline, in fact this polygon doesn't have vertices or normal and I have no way to select it and delete it.

I have removed the triangle before stitching the two meshes together, what can I do to remove it?

https://preview.redd.it/jf5vtif2863f1.png?width=2559&format=png&auto=webp&s=83487a65db7b88160ca12628c86720fd71fe8320

12


r/VisualStudio•

Hello everyone!

I'm using Visual Studio 2022 for a C++ project, and I have installed the Clang Power Tools to be able to use clang-format, which is configured to use the LLVM style without any extra options.

When I press ctrl+s clang-format is invoked and the file is formatted and saved, usually (and by that I mean 7 out of 10 times) this works flawlessly.

However for some reason (especially in my googletest unit test file) this breaks, a lot.
And the issue is that is breaks the C++ syntax, losing some characters as well.

For example this code

TEST(lua_driver, check_support_for_double_infinity) {
    using namespace gsm::lua_driver;

    EXPECT_TRUE(std::numeric_limits<do
11

r/arch•

Hello everyone!

I have a PC with Arch on and it's using an Intel BE200.

Right next to it I have another PC with an AX201 (but on Windows), both have the same antenna and are placed right next to each other.

While the AX201 pulls 800 mbps up/down from the router, the BE200 pulls only around 200 to 400 mbps down and 150 to 200 mbps up.

I've tried a bunch of things:

  • Upgrading the kernel to 6.12.10 (I can't go to 6.13 since I depend on zfs-linux, however I satisfy the requirement from Intel of using 6.11 and above)
  • Upgrading `linux-firmware` and `linux-firmware-whence`, in the hope that it contains some better firmware for the Intel BE200.
  • Disabling bluetooth coexistence via iwlwi
10

r/homelab•

Hello everyone!

Due to unfortunate reasons I am forced to use a WiFi adapter on my Linux server at home. The WiFi adapter in question is an Intel BE200, which should be fairly decent. However the performances are poor, especially in comparison to a slightly older Intel Network Adapter, integrated on the motherboard of a Windows PC, which is using the same exact antenna and is place next to the other one.

My motherboard on the other hand is an X13SAE, which does have a compatible M-Key M.2 slot, however said slot is already taken by the M.2 Nvme SSD for the OS.

Therefore my solution was to get an adapter... of course from an unknown brand (JSER), which reports the following specification

012

r/applesucks•

I'm a Developer, I regularly work with both Windows and Linux. Both with their quirks, but usually the system doesn't get in the way much and I get to do what I want to do just fine. Even updates, the meme of Windows, aren't a problem in Windows 11, or at least not one I had to deal with.

Recently I've been working on an application that will run on Web, Windows, Linux and MacOS.
Now here's the thing, I do own a MacBook, a MacBook Pro Early 2015 in fact, on which I had installed Linux.

Today I decided to ruin my day by installing MacOS, and this is the story (starts at 22:00)

I reboot using Cmd+R, I am greeted by the Network Recovery, it asks for the WiFi password and it starts download

8196

Ciao a tutti,

ho 22 anni, e devo dire che ho una situazione non disastrosa, riesco a prendermi 1.7k netti quasi ogni mese (dipende dalle diverse ore di straordinari che faccio), "pagando" con quasi tutto il mio tempo libero. Il poco tempo libero che ho viene speso su altri progetti che spero saranno redditizzi e qualcosina su di me (ovvero dormire, mangiare, spendere 1 ora su intrattenimento e varie).

Per il momento vivo coi miei genitori, non potendomi permettere un appartamento, e sto mettendo quasi tutto ciò che ho sul mio broker sperando di farlo crescere ed evitando di spendere soldi su altro (tranne per una minima parte). Per il momento questo mi va bene, in teoria la situazione in c

37

Ciao a tutti,

ho 22 anni, e devo dire che ho una situazione non disastrosa, riesco a prendermi 1.7k netti quasi ogni mese (dipende dalle diverse ore di straordinari che faccio), "pagando" con quasi tutto il mio tempo libero. Il poco tempo libero che ho viene speso su altri progetti che spero saranno redditizzi e qualcosina su di me (ovvero dormire, mangiare, spendere 1 ora su intrattenimento e varie).

Per il momento vivo coi miei genitori, non potendomi permettere un appartamento, e sto mettendo quasi tutto ciò che ho sul mio broker sperando di farlo crescere ed evitando di spendere soldi su altro (tranne per una minima parte). Per il momento questo mi va bene, in teoria la situazione in c

11

r/WireGuard•

Hello everyone!

In a week or so I will have a trip to China, therefore I'm trying to set up a Wireguard VPN on my Home NAS to access various services that will be blocked by the "great firewall'.

Everything works, I can connect my phone to my server and browse the internet, for example I can access Google and some random websites, like one to check my IP address, or use services such as Telegram correctly.

However, some other times, some websites redirect me either to nothing or to some services that I host on my Home NAS locally, and I am very confused as to why that happens.

The services in question are hosted via Docker, and live in the 172 range, for example [172.30.0.9](http://172.3

16

r/HomeNetworking•

Hello everyone!

I have recently installed OpenWRT (23.05.3) on my Banana Pi R3.

I have a 1Gbps upstream connected to the Router RJ45 WAN port, and I have enabled both 2,4 GHz and 5 GHz WiFi, on different access points.

I set the 5 GHz WiFi as follows:

  • Channel 56: Much more free than 36 according to the scan, I tried using higher channels such as 100 which are empty on the scans, but my devices failed to find the WiFi signal.
  • Width 160 MHz: I have multiple 160 MHz capable cards and I need the most out of WiFi
  • Mode AX (it was the default)
  • Transit power 20 dBm (also the default)
  • I did set the country code to my country
  • Left everything else on default
    • Coverage Cell Density:
10

r/homelab•

Hello!

I have decided to switch from my ISP router to a Banana Pi R3 with OpenWrt on it.
Had great improvement to WiFi performances, and finally full access to my router.

However, my WAN RJ45 port is only 1Gbps, while my ISP provides me with 2.5 Gbps (yes, the router they gave me is also 1 Gbps WAN), my idea was to buy an SFP+ RJ45 transceiver module and insert it into the SFP+ WAN port, so that I could then leverage 2.5 Gbps WAN speed and faster Internet.

However... it seems like it doesn't work? Is there something I'm missing or I'm just dumb and not finding the right interface?

SFP+ and custom routers are something I didn't manage to play with before, I am starting to wonder with SF

111

r/ItalyInformatica•

Oggi mi hanno, finalmente, messo la FTTH a casa, abbastanza rapidi per altro.

A parte gli assurdi progetti di cablare casa con la fibra ottica, perché sì; mi sono un po' interessato nel setup, e nel guardare che avevano fatto i tecnici ho notato qualcos di interessante...

Io pago l'abbonamento 2.5 Gbps, inutile dire che non arriverò mai a 2.5 Gbps, arivare a 500 Mbps per me è già un sogno, però insomma, essendoci sia i pacchetti da 1 Gbps che quelli da 2.5 Gbps la differenza è importante.

Dunque, esce il cavo in fibra dal muro e va verso l'ONT della ZTE, in effetti dall'ONT c'è una bella porta RJ45 con una dicitura 2,5G... evvedìtu! La cosa interessante è che un cavo completamente anonimo

3047

r/homelab•

Before you bite my head off, I know, I would also really like to wire my walls with Ethernet cables, but I've been told that there is not enough space to insert in the channels under the floor, and I won't be alive for long if I put a tiny duct to hide an Ethernet cable on the ceiling or something.

In short, I need WiFi, I just got my nice upgrade to FTTH Fiber which comes with it's not so shiny but new WiFi6 Router.

I've heard about the Intel AX210 being a pretty good card, but I wanted to know if anybody could suggest some kit with the AX210 and a good antenna, or, even better, a good USB WIFi6 adapter.

I know that this is a huge waste of performances, but... it's unfortunately, for now

17