MrCookTM

u/MrCookTM



r/Corsair•

As stated in the title, I have a h115i and am trying to fugure out if it's possible to have the rgb lighting of the pump in two different colors, ie red for the Corsair logo and White for the outer ring. I'm almost certain I've seen this in videos, but apparently I'm unable to figure out how to do it. Google wasn't helpful either. Can anyone tell if this is even possible and if so, how to do it? Thanks!

edit: Sorry for the typo, of course the title means 'solid color'.

111

r/buildapc•

Hi folks, I tried my luck already over on the Gigabyte subreddit a few days ago but didn't get any replies.

I just got my 2070 Super Gaming OC and the card itself works like a charm. However, very randomly when I boot up my rig, the blue color of the gpu's rgb doesn't work. I installed RGB Fusion 2.0, set the color for the Gigabyte logo to solid blue and it just stays dark. If I set a color that has blue in it, i.e. 255 R/255 G/255 B for white, it will light up yellow. Green and red work just fine, it's only blue that doesn't.

I control it via RGB Fusion 2.0, which seems to be a buggy clusterfuck of a software after searching the web for a while. However, all the reported issues I've foun

10

r/gigabytegaming•

Hi, just got my 2070 Super Gaming OC and works like charm. However, since I restarted my rig, the blue color doesn't work anymore. I installed RGB Fusion 2.0, set the color for the Gigabyte logo to solid blue to fit my other rgb, applied it, everything was fine. After I restarted, the RGB on the GPU didn't light up. Statted RGB Fusion, still set to blue.

The funny thing is: green and red work just fine. Just blue doesn't. Not just solid blue though, everything that has blue in it doesn't work properly either. Like i.e. purple just lights up as solid red.

Is this an issue with the software or woth the card? Can a single color in an RGB light 'break'? Sorry if this is a very dumb quesion, I

12

r/buildapc•

EDIT: Fixed! Thanks to u/NonXtreme, clearing cmos did the job. Also thanks to everyone else trying to help, it's really an awesome community.

​

Hey guys,

today I switched from my old 2x8gb 3000 dimms to 2x8gb 3600. The new RAM is validated with the motherboard via the QVL list, I enabled D.O.C.P (it shows 3600 and correct timings) in BIOS. Yet somehow if I check the numbers in BIOS or CPU-Z, my RAM is still running at 3000mhz 16.20.20.38 rather than 3600mhz 18-22-22-42. Any ideas?

Some info on the specific hardware:

Mainboard: ASUS TUF B450 Plus Gaming

CPU: Ryzen 5 3600

Old RAM: Corsair Vengeance LPX (CMK8GX4M1D3000C16)

New RAM: Corsair Vengeance RGB

28

r/Squonk_Life•

Hello guys,

I've tried to google some information on my problem but wasn't able to find anything. Maybe you fellow Luna-users can help.

​

Starting today, my Luna's LED flashes green 5 times instead of firing whenever I hit the fire button. I've checked the manual (vie web, since my one is in chinese), descriptions on both the Ultroner and Asmodus website and YouTube videos, and it seems there's no situation where the LED should flash green 5 times when hitting the fire button.

​

It flashes red 5 times if there's a short, however wrong colour and I counter-checked on a different mod aswell as my ohmreader and it's fine, no Shorts. I also tried a different RDA, same

110

r/MonsterHunter•

Don't know if this was commonly known, I did not and have been curious about this for a while, until I finally tested it last night.

What does this mean: if you're doing a T2 great hunt, in my case it was a tempered Odogaron + tempered Radobann 4 box investigation, pick up the T1 tempered monster's tracks too. They give T2 in investigations if you happen to pick them up during an actual T2 investigation.

06

r/ffxiv•

Hey Guys,

long story short: tomorrow I'll be subbing in for another group in my FC on my War alt, since their Drk is out for a week. I tried to find some info/PoV's, but there wasn't much I could find.

Does anyone have experience in A12S MT'ing on War and can share their CD rotation?

Thanks in advance!

117

r/ffxiv•

Alright, this is done with permission of my statics MCH. His dps isn't quite where he wants it to be, and after watching a lot of PoV's of top lvl MCH's like Rin, studying guides (he's still rather new to the job, around 3ish month's) and trying a lot of different stuff like stance dancing etc., he's slowly coming to the point where he doesn't really know where the problem lies.

This is yesterday's A10S parse of my group, I picked that one specifically because there were no deaths on his side. His overall ilvl was 262 with a Sophic weapon. Ofc feel free to look at other parses of other turns though: https://www.fflogs.com/reports/GRF7nqYLPz2CXpa6#fight=10&type=damage-done

I for myself

1325

r/FFXIVRECRUITMENT•

Hallo zusammen,

unsere static ist aktuell auf der Suche nach einem BLM/SMN für 3.4 progression, der Spot wäre jedoch auch ab sofort verfügbar.

Vorab ein paar Worte zu uns: unsere Gruppe ist aus zwei aufgelösten statics entstanden, gegen Mitte/Ende von 3.1. In der Konstellation haben wir noch A3S gecleared, als es aktueller content war. In Midas haben wir früh A5S gecleared, A6S noch vor den nerfs. A7S liegen wir mittlerweile bei 16 Kills/Wochen. Danach mussten wir aufgrund von Arbeitsschichten und Besetzungsänderungen im Raid zurückschrauben und nebenbei ein neues Mitglied in 6 und 7 einlernen, daher kam der Progress etwas zum stehen. In der letzten Zeit haben wir jedoch wieder regelm

10

r/ffxiv•

Heya folks, see title: I'm going to start crafting (again) and need a bit of advice where to start out. Now I'm not entirely new to crafting, I omnicrafted during ARR but got turned off at the start of HW from the whole favor mat, 15 min buff ridiculousness for already outdated gear and kinda put crafting on the bench. Now I want to get into it again, but I'm not attempting to be 4-star ready come 3.4 or anything like that, I just want to do some general stuff like craft my own food and pots (steamed staff, draconian) and do some occasional other stuff, as well as being able to make my own IW at some point (not a priority by now).

I can can get a set of carbonweave made by a friend incredib

821

You've reached the end of this feed.