NetworkStatic

u/NetworkStatic


I had my car in for a little dent repair and it came back with the passenger front woofer sounding blown.

The options I found for replacing it were extreme in cost. Poking around to find out what my options were for the B&O system I found that the door woofers were 6.5". Once I got the door apart I was pleasantly surprised to find the woofer is in a sealed enclosure and that a 4ohm dual voice coil woofer will work just fine with the factory B&O amplifier.

I settled on the Kicker 48CWRT674 CompRT 6.75" Subwoofer to replace the factory woofers. They fit nearly perfectly in the enclosure and the installation was painless. I added sound deadening to the door shell and inner door card while I

86

r/3CX•

Hello All. I'm working on getting some SIP based intercoms working with an older 3cx version. My main issue (I think) is that 3cx doesn't have a phone/intercom model listed for my particular phones. I've had luck in the past with using a similar model selection in the 3cx configuration menu even though my exact model wasn't listed, something close ended up working just fine.

Any ideas for a generic phone model that might work when selected from the Phone Provisioning menu?

02



How did everyone find this, if you went this year?

I'm new in Colorado, was excited to get out to the event. I thought it was pretty small and didn't have many cars. Maybe a rough comparison since my last auto show was Essen auto show in Germany.

810

r/CarAV•

Wondering if anyone has some experience with a setup such as this. Perhaps another idea for resolving besides what I propose

The issue; Native output from Android 10 head unit is from 3.5 mini-jack to AUX in on car head unit. Seems like at some point the audio may be getting mixed poorly as the bass is muddy and exaggerated as well the audio lacks some clarity. To make matters worse, as I understand it there is a crappy Android DAC that is also used natively.

The plan;

OTG USB adapter >> USB DAC connected to Android unit USB >> Optical digital output from USB DAC to AudioTech Fischer UP7BMW Optical input. Also using an android App to route audio to USB DAC and bypass Andro

24

r/CarAV•

Car: 2009 Porsche Cayman
Hardware under consideration: 3 way components
Budget: $1k
Amplification: Polk Audio PA D5000.5 900W RMS 5-Channel
Head unit: Pioneer AVIC-W6400NEX (unless you all have a better idea)
Goal: Something that fits correctly and will reproduce bass effectively, I'm looking for clarity as well
Primary music choices: Jazz, Drum and Bass, Jungle

Ideally I'm looking to replace the factory speakers with something the same size. To my knowledge the woofers are 8", mid is 4" and tweeters are 1". I don't have a good place to put a subwoofer in the car, and I'm not sure it's necessary if the woofer will produce a good quantity/quality of low bass. Interested in

17

You've reached the end of this feed.