QuazL

I have an issue with detection code and I am leaning towards a bug.

Detection Code Outputs

Here is my script:

exit 0

or

[System.Environment]::Exit(0)

This gives me an exit code of "0" with an empty stdout and stderr. SCCM should see that application as "Not Installed". It sees it as "Installed"

Of course, my real script is longer, but I am using this to test and I am not getting the correct response.

Is my thinking backwards? I have found multiple links, articles, and blogs that talk about using powershell as a detection method, but it isn't working for me.

Any hints or ideas?

Thanks,

When I am listening to a stereo source (CD, Spotify, MP3) the sub either isn't playing or barely audible.

I have a Marantz SR6012. I found this in an old post from user "MDS" from Audioholics:

• Is the subwoofer set to 'on' or 'yes' in the receiver setup menus?

• Is the volume control on the sub set at some setting above zero?

• Do you have the other speakers setup in the receiver setup menus and set to Small? If they are all set to Large there will be no sub signal (unless the receiver also offers a subwoofer mode like 'both' or 'lfe+main').

• Is the receiver set to a processing mo

I have SVS Ultra Towers and Ultra Center coming in soon. I will have a 7.1.4 setup. The Marantz is going to require an amp for the extra two channels to get to the full 7.1.4 and I will use the amp on the front left and right.

Is it still possible to bi-amp? Do I come out the pre-amp connections with y-splitters to the 2, 2-channel amps?

Should I bi-amp the center or is that even worth it?

Thanks,

I am going to have a remote wiring closet. I am going to have wall plates in the theater, but would like to keep the wiring closet as clean as possible and would also like to have wall plates in the closet.

The amount of banana plugs would increase with the extra wall plate.

The front, left, and center would get a plate. If I had a banana plug for each end of the cable there would be four banana plugs from speaker to receiver.

Is this bad?

Thanks,

It seems that a lot of the 9.2 receivers will allow an external amp to achieve the .4 for atmos. I have never had a an amp in my setup, so my questions will seem newbish to some.

My goals are to have the front and center speakers on an amp, to reach 7.1.4, and to save some money on a receiver.

Questions:

If I buy a 5 channel amp, can I use 3 channels for the front speakers and the other two channels to achieve the extra 2 channels for atmos?

Does the receiver actually have the processing for all 11 channels?

I have an all in one SCCM (brand new install) box which includes WSUS installed as well. I also have a functioning WSUS on another server.

Is it possible to first replicate the upstream WSUS and then change it to primary after I have made the two instances equal?

I am hoping to do this method:

http://www.vkernel.ro/blog/migrating-wsus-from-one-server-to-another

After that I would remove any old GPO's and let the SCCM client take over.

Is my thinking correct?

The SCCM Console on the stand alone server works perfectly. The console on any remote machine connects fine, but there are many, many errors when opening up windows.

The gist of the error is this:

The SMS Provider reported an error.

"ConfigMgr Error Object: instance of SMS_ExtendedStatus { Description = "Error retrieving object FileType=2"; ErrorCode = 2151811598; File = "e:\cm1702_rtm\sms\siteserver\sdk_provider\smsprov\SspInterface.h"; Line = 1198; Operation = "GetObject"; ParameterInfo = "SMS_SCI_Component.FileType=2,ItemName="SMS_WAKEONLAN_COMMUNICATION_MANAGER|ITMSSCCM01.intouch.org",ItemType="Component",SiteCode="P01""; ProviderName = "ExtnProv"; StatusCode = 214

Usually, one can get 150 desktop and 100 mobile search points a day.

Game Pass right now as a reward is 6800 points Game Pass Reward Link

Doing the basic searches will pay for Game pass:

250 points per day X 30 (Average days in the month) = 7500.

If one grabs a year of Xbox Live when it is cheap, you can really get a lot of games for ~50 bucks a year. The Game Pass games and the free monthly games.

To be honest this is the low end. A lot of the time I can get more with casual searches.

My favorite way to farm the points is to go to the News section of Bing and click all the links; it saves keyboard typing.

It might be possib

I have read the comprehensive sleeving guide on BGG.

Guide

I have also read a few sleeve comparison videos and blogs. Has anyone got specific input on their experience with sleeving Gloomhaven?

What did you use?

Do you like them?

Is it really worth it?

Thanks,

Edit: Thanks for all the extremely helpful input. I ordered a pack of standards and mini europeans from FFG and Game Plus to get a feel for each. I really like the idea of only sleeving (spl?) the cards that I unlock. I am going to follow the recommended sleeving guide on what gets sleeved first. Now to play and find the perfect storage soluti

I have looked at this link here:

http://docs.mamedev.org/advanced/multiconfig.html

This talks about the load order of all the different configuration files which makes perfect sense and I use this cheat sheet for vector and horizontal games.

The NEOGEO system by SNK had an 8way Joystick and 4 Buttons. I need to setup a controller configuration file for all of these games in MAME. It is nice that in the documentation at MAMEDEV that they mention a few of the systems and even mention NEOGEO by name, but this doesn't actually cover all of the games released with this joystick and button layout.

I can easily make the joystick configuration

I think that i have a 27" Wells Gardner d9800

It has a model number of WGZ2798-U0FS12S. Am I right in thinking I have a D9800?

I tried contacting WG and they don't have the manual anymore and they also couldn't help me identify it either. I also can't seem to find the owner's manual, schematics, or detailed specifications on the web.

Does anyone have these are know where to get them?

I need to find the V-Hold pot and for the life of me I can't find it and the board is so hard to read.

Also, does anyone know of good test generator to do advanced adjustments?

Thanks so much,

I have a switch that controls two devices, one is a fan and one is a light. When I turn the switch on it turns both devices on.

The fan came with a really cool device that allows me to control my the lights on the fan and fan speeds separately with a remote.

I am looking for something to put in the junction box in the ceiling that does the same thing for the light on the same circuit. I would like to be able to keep the switch flipped on and use my remotes to control each device.

I can't for the life of me find the terminology to search for one of these devices. I have found wireless lighting systems, but i just need something like the wireless devices that came with the fan without th

In the playbook, one of the first moves the Government makes is a Limited Operation Rally (page 5). The player replaces two cubes and puts out a base in Las Villas.

Here is the rally rules for the Government:

3.2.1 Train. Training Operations augment Government forces and possibly build Support (1.6). Select any Provinces or Cities and pay 2, 3, or 4 Resources per selected space according to the US Alliance track (6.3.1).

PROCEDURE: First, in each selected Province with a Government Base AND in each selected City, place up to 4 cubes (any combination of Available Troops and Police). Then, in up to 1 selected space, either:

• Replace any 2 cubes with 1 Gove

Just wanted to share the neat little storage solution that I found at Hobby Lobby for Castles. I know that the game comes with a nice insert, I just don't think it is good for quickly setting up the game and also there just isn't enough separators for my liking.

My time has been quite limited, so my foam core builds have come to a halt and have now started looking for quicker alternatives without breaking the bank.

I found these at Hobby Lobby. They are jewelry boxes.

Album

• The tops make great dice trays
• You can shake the box as hard as you want and the tiles don't flip over which is great for shuffling and setup
• They fit in the box nicely
• They