RandomGerman

I have been on Tirz for over a year. the last 9 month I was on pure Tirz (I am in California) and Sunday I started a new batch of Tirz with Glycine. I was happy I did not feel any side effects after injection but Monday I was fairly hungry all day and after Dinner I felt nauseated a little. Restriction is there because I was full for quite some time. I clocked this. today, Tuesday just had dinner and again nauseated. and also I was hungry more than usual. I basically counted the minutes to dinner.

the only difference is glycine. the Tirz is more concentrated so I only use 75 units instead of 83. but that’s just concentration.

anybody have any experience or do I just need to suffer throug

sorry for the weird header but I did not know what to write.

i was cast in a major movie. Yaehh! this will make me SAG-E.

after filming it, it appears to me that my character is very memorable and might be bigger than expected. i mean Bronson Pinchot in Beverly Hills Cop memorable almost. This will catapult me up the ladder.
I feel like I won the lottery. (I could be wrong)

BUT

here is my question: I can’t tell anybody. I cant publish anything. I cant put it on my resume (right?).

what can I do in the year prior to the roll that people will at least notice me and know I exist? it will take at least until Summer or fall 2027 for the movie to come out.

this is total Limbo. What

I had to go on a surprise work trip. I packed my Tirz into a thermos and it was fine and cold when I arrived. I put it into the hotel fridge. Today is shot day and I just took it out and it is completely frozen. I am thawing it in water now but is this ruined? too dangerous to use or is the worst that can happen that it works less.

I am gone for 2 shot days. this is my first one.

Anybody have any advice. Search said its fine and in other posts its not fine... What do I do? And not having Tirz for almost 3 weeks will be torture

Hello. I have a frustrating and now expensive issue.

3 weeks ago my gaggia stopped working. No water came out and it sounded quieter. I have a magnetic counter attached to the solenoid valve that starts a timer when it gets activated. That counter stayed off.
Diagnosis solenoid valve dead.

I order a new one, swap it out and the machine works again. Perfect.

Today, 5 days later I go to my machine and SAME ISSUE, new valve. It is dead again.

My Setup:

• Gaggia Classic EVO.
• I use RO Water. There is no scale and there was nothing when I opened it last week.
• I use a smart plug to turn the machine on and off every day

Did I buy a faulty solenoid valve? Just bad luck it dies after

I unpacked and set up my Kobra X today.

All went well. Calibration went well. Then I printed a benchy and halfway up the cabin something happened with the printbed. Giant layer shift and it rattled from then on. Next print was totally dirty, not even and it rattled the whole time. It looks like I can lift the bed up. See video. I cut together On board camera and phone while printing and when turned off me manually being able to rattle the bed.

Easy fix or return due to defect?

Rattling Print bed. Kobra X

OK... I know this was answered and I went through so many posts. I changed so many settings and none worked or made any difference.

Lets say I use sabnzbd to download something. When I have firefox open my speed is between 35 and 50 MB/s. When I close Firefox the speed goes up to 105 to 109MB/s. When I open chrome and access the UI the speed is 105. When I let it run without a browser the speed is 105. When I open Firefox the speed is 40.

I have reset Firefox.

I have run it in safe mode.

I created a clean new user in Firefox with no extensions

I have changed all the settings that were ever mentioned anywhere.

I have consulted AI to give me more settings to change in Windows and insid

I spent 2 months on 15mg Zepbound (insurance covered) before switching to compounded Tirzepatide (no additives) in January. No gap in doses.

Vial 1: ( 3 shots/weeks) Felt almost nothing. High hunger, giant heartburn, 3-week weight plateau. I used the same spot near my navel for every shot.

Vial 2 (Shot 1): Total 180. Day 3 and I have the most restriction I’ve ever felt in my life. I feel full since yesterday and I have zero hunger cues.

Question: Has anyone experienced this much variance between vials from the same shipment? Could it be the injection spot I was using, or is it common for compounded batches to vary this much? I’m worried Vial 1 was weak and Vial 2 is almost too

Police siren after police siren and constant helicopter noise circling. No idea whats going on but it is a little much. You would think there is a riot or something.

I am not complaining but just wondering. I purchased my first vials after insurance Zepbound pens with the Thanksgiving deal at Refills. bought the 3 month package.

There was the whole shipping time issue and we all waited and were worried we don't get it but it arrived.

I received 5 vials with [45mg 2.5ml (18 mg/ml)]. I take 15 mg doses and that calculates to 83 units. I used the Fat Scientist calculator. Also it came with instructions that said 83 units. So that is what I took.

Today I did my third shot. 1st vial and it is almost empty. There is maybe a 1/3 shot left in there.

Now I have 5 of those. which is 15 shots in total and 5x1/3 is another and a little. which is, lets say 16

I really was anxious for this day. I even delayed by one day. I have been on Zepbound since June and am at 15mg but like many of us insurance stopped covering it. Got a Vial deal (Refills - 3 month) on Thanksgiving. Today I did my first shot. I was so anxious to inject. Actually more nervous drawing the liquid into the syringe. I have never done this.

I got myself the Autoject 2 because ... I know it is not needed but it felt I should try that first. I did practice with water a few times. Speed and feel of it. Read the instructions a few times, watched videos. Then I loaded the syringe... No issues, followed all the advice on reddit like disinfect rubber top, inject air into the vial first

Hey all. I have recently moved to another apartment on November 15 and I packed my scale into a box and changed location. I had exhausting days where I did a lot and I had days where I barely moved. I stopped counting calories because I did not eat much anyways. It felt like I had lost more weight. My belt moved into another hole. That is now 3 inches loss of belt. Seems an inch for every 10 lbs. My arms look so skinny and I can see my muscles move on top of my hand when I move my fingers.

Finally I got to my last box with the scale an unpacked it. Move was done and I stepped on the scale on December 31 to get a starting weight for the new year. And to my surprise (not a good one) I was on

I have observed something strange - or let's say unexpected. I had weight loss surgery in 2018 and went down from 390(ish) to 265. That changed my life. When I was the heaviest I took many selfies and always liked them. After I had lost the weight, I could not look at them and was shocked that I had let it go this far (knowing it is a disease and I had no control really). I was shocked how huge I was. Basically I looked like Perter Griffin from Family guy.

Then COVID happened, weight loss stopped after 18 month (honeymoon phase), life stress, job, weight slowly crept up. Denial and not believing it is part of this too. I could deal with 35 lbs more back to 300 but in the last 3 years I had

This should be a quick question.

I usually do not drink.
I used to drink (or get drunk) maybe twice a year (New Years and birthday) just for fun and not too bad. My mother was an alcoholic and I stay away from it.

After weight loss surgery I could (still can't) barely drink anything without getting really tipsy. One drink I feel strongly and two drinks are like 4 before surgery. Still in control though and able to slow down.

Now... I have not consumed any alcohol on Zepbound yet (since June 2025). I am invited to a party tomorrow and will not drive.
Does Zepbound do anthing? Make it worse or better or no difference? I don't want to all of a sudden be really drunk after a drink or

OK. I don't want to seem shallow but I am doing the acting thing with auditions and self tapes. It was very quiet lately and I had moved and asked my manager to not send me anything but I had a commercial audition today. I had not done any in over a month and I noticed my face looks tired.

I have now lost around 35 lbs and it really shows in my face. I have a neck again but the skin feels loose. I am still fat (293 lbs) but I don't love my face now. Not friendly. I did not have that effect last time I had lost this much after gastric sleeve, but I was not an actor back then and 8 years younger.

Anything I can do to make my skin a little more tight or smooth or whatever? I never cared abou

OK. I had hoped I can find all the info I need but I could not I tried. I have just ordered a 3 month supply from Refills. Confused about the website but I did it. Now waiting for the doctor to approve. I really hope I ordered the right stuff with the right dosage. It does look like I did.

Now my issue is with injecting it. I checked and I would probably have to inject 83 units. Since I am on 15mg Zepbound. That is the whole syringe almost.

• How bad is injecting this much? With bad I mean pain/discomfort. The Zepbound automatic injectors did not have that much liquid.
• I assume it is a small needle that I push all the way in?
• How fast do I inject?
• Will refills send me syringes or